Everflourish EMW202T Instruction Manual

Reference: EMW202T + EMW202Rx3

Function

1. The remote control socket turns on and off the connected lighting or appliance by a wireless
transmitter, using radio frequency up to 25 meters away.
2. It is ideal for lighting control, for the purposes of home automation and energy saving.
3. The receiver has the indicator light for power supply status.

Operation

1. No setting is required. The transmitter has the channel 1,2,3 to control the receiver 1,2,3 when
applicable.
2. Connect the remote control socket to the power supply.
3. Turn off the appliance before connecting to the remote control.
4. Remove the plastic tab at the battery holder on the transmitter to allow battery contact.
5. Press the corresponding "
connected appliance by remote control.
6. The indicator on the transmitter blinks once for every transmission of power on/off.
7. When the indicator light on the transmitter dims, battery changing is recommended. Open the
battery holder (as per below figure) and replace it.
Caution
1. For safety reason, always switch off your appliance before connection
2. For INDOOR USED ONLY
3. Appliances to be connected to the remote control socket MUST NOT exceed the voltage and
frequency ratings as in "Specifications".
4. To disconnect Voltage pull the plug.
5. Do not connect after each other.
6. The safety standard for household products does not permit remote control of all products. The
remote-control receiver can't be used to start equipment that could be hazardous, such as
curling irons, deep fat fryers, heaters, heating blankets and hairdryers.
7. The adaptor shall be installed near the equipment and shall be easily accessible.

Specifications

EMW202R
1. Power Rating : 230V~, 50Hz,
2. Resistive load: 1000W max.
Instruction Manual for
RF Remote Socket and Transmitter
", " " button on the transmitter to switch on and off the