Page 2
DRL-048, DRL-072 Crop Seeder Page left blank intentionally...
Page 3
DRL-048, DRL-072 Crop Seeder TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Tar River dealer. Read manual in- structions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Owner’s/Operator’s Manual are completed before releasing equipment to the owner.
DRL-048, DRL-072 Crop Seeder Table of Contents Introduction …………………………………………………………………………………………….. 5 Technical Specifications ……………………………………………………………………………….. 5 Safety …………………………………………………………………………………………………… 6 Safety Signal Words ……………………………………………………………………………………. 6 General Safety Guidelines ……………………………………………………………………………… 7 Safety Decal Care ………………………………………………………………………………………. 7 Before Operation ……………………………………………………………………………………….. 8 During Operation ……………………………………………………………………………………….. 9 Highway And Transport Operations ……………………………………………………………………...
DRL-048, DRL-072 Crop Seeder Introduction Thank you for purchasing your DRL Crop Seeder. The DRL Crop Seeder designed to be used in prepared seeding conditions. It is not intended as a No-Till Drill. It is important to properly maintain and keep in place all safety guards and shields that came with you machine.
DRL-048, DRL-072 Crop Seeder Important Safety Information Safety It is important that you read the entire manual and to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification.
DRL-048, DRL-072 Crop Seeder Important Safety Information General Safety Guidelines Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. De- signers and manufacturers build in as many safety features as possible. However, every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment.
DRL-048, DRL-072 Crop Seeder Important Safety Information How to install Safety Signs: Be sure that the installation area is clean and dry. • Decide on the exact position before you remove the backing paper. • Remove the smallest portion of the split backing paper.
DRL-048, DRL-072 Crop Seeder Important Safety Information During Operation Children should not be allowed on the product. • Clear the area of small children and bystanders before moving the feeder. • If using a towing unit, securely attach feeder by using a hardened 3/4” pin, a metal retainer, and safety •...
DRL-048, DRL-072 Crop Seeder Important Safety Information Highway and Transport Operations Adopt safe driving practices. • Keep the brake pedals latched together at all times. Never use independent braking with machine in tow • as loss of control and/or upset of unit can result.
Page 11
DRL-048, DRL-072 Crop Seeder Important Safety Information Highway and Transport Operations Maneuver the tractor or towing vehicle at safe speeds. • Avoid overhead wires or other obstacles. Contact with overhead lines could cause serious injury or death. • Avoid loose fill, rocks and holes, they can be dangerous for equipment operation or movement.
DRL-048, DRL-072 Crop Seeder Assembly Step 1: Support the frame a few feet above the floor with blocks or a Tar River Implement handler. DRL-072 Align the double disc openers to the proper 7.00” spac- ing. It is easier to begin mounting the “U” bolts that hold that hold the Double Disc Assembly on one end and aligh the nest one on the same bar 14.00”...
Page 13
DRL-048, DRL-072 Crop Seeder Assembly Step 3: Separate the hoses which come with the machine. The 5 longer hoses are to be installed from the front seed cups to the rear double disc openers. The longer hoses are darkened in the illustration for clarity.
Page 14
DRL-048, DRL-072 Crop Seeder Assembly Step 6: Install the cage roller on both arms. Ensure grease fitting is to the outside. Secure in place with nuts and cotter pins. Step 7: Attach the packer wheel arm. Step 8: Attach and install the roller adjust- ment rod.
Page 15
DRL-048, DRL-072 Crop Seeder Assembly Step 11: Lightly push seed box forward to tighten the chain. Use an Allen wrench to tighten the drive sprocket after ensuring the chain is straight. Install chain shield. Step 12: Install back bracket bolt Step 12b: Install step board.
DRL-048, DRL-072 Crop Seeder Operating Instructions Before beginning work: Be sure all the seed cups completely close and open the same, so all cups are putting out the exact amount • of seed. If they are not in sync, one cup will put out more than others.
DRL-048, DRL-072 Crop Seeder Operating Instructions Seeding/Fertilizing rate adjustment handle: To adjust the fertilizer rate, you will need to adjust hand wheels (on each side of hopper). The seed/fertilize rate depends on the seed/fertilizer you want to plant, please refer to your seed/ fertilizer supplier’s chart to get the proper seed/fertilize rate.
DRL-048, DRL-072 Crop Seeder Operating Instructions Seed cup shutoff: Depending on the crop being planted, it may be necessary to not disburse from all of the seed cups. This is eas- ily done by simply sliding the “Seed shut off flap” in and out.
DRL-048, DRL-072 Crop Seeder Lubrication and Maintenance Important: It is important to thoroughly clean the seeder after use. Failure to do so can cause irreparable dam- age to the seed cups and drive system. Grease and turn the Seed adjustment handle to ensure grease lubricates the threads.
DRL-048, DRL-072 Crop Seeder Seed Charts Large Seed Cups 11 - 26 Gear Ratio Cup Setting Fescue Wheat Corn Gran. Fertilizer Small Seed Cups 12 - 40 Gear Ratio Cup Setting Fescue Wheat Centipede Gran. Fertilizer Note: The rate charts are for guidelines only. They are designed to be an aid as a starting point. You must do your own calibration as many factors cause rates to change.
DRL-048, DRL-072 Crop Seeder Notes: This chart is an approximate estimate of torque values. Always tighten hardware to these values unless a different torque value or tightening procedure is listed for a specific application. Fasteners must always be replaced with the same grade as specified in the manual.
Page 22
DRL-048, DRL-072 Crop Seeder Page left blank intentionally...
DRL-048, DRL-072 Crop Seeder Hopper Assembly LH (rear) RH (front) Front cup box Rear cup box Note: The Rate adjustment plates are not the same. LH Note: Front and rear seed cup boxes can be identified plate faces the rear of the machine. The RH plate faces by examining the shafts.
Page 26
DRL-048, DRL-072 Crop Seeder Hopper Assembly LH (rear) RH (front) Front cup box Rear cup box Note: The Rate adjustment plates are not the same. LH Note: Front and rear seed cup boxes can be identified plate faces the rear of the machine. The RH plate faces by examining the shafts.
DRL-048, DRL-072 Crop Seeder Warranty LIMITED WARRANTY Belco Resources Equipment warrants to the original purchaser of any new piece of machinery from Belco Re- sources Equipment, purchased from an authorized Belco Resources Equipment dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state, and mu- nicipalities’...
Page 38
DRL-048, DRL-072 Crop Seeder LIMITED WARRANTY Belco Resources Equipment warrants to the original purchaser of any new piece of machinery from Belco Resources Equipment, purchased from an authorized Belco Resources Equipment dealer, that the equipment be free from defects in material and work-...