Input Settings - JVC KW-V340BTM Instruction Manual

Monitor with dvd receiver
Table of Contents

Advertisement

Settings
Settings
<Screen Adjustment>
Adjust the brightness and blackness of the screen.
Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer
off), then change the following settings:
<Bright>
Adjusts brightness.
• –15 to +15 (Initial: 0 for dimmer on, +15 for dimmer
off)
<Black>
Adjusts blackness.
• –10 to +10 (Initial: 0)
<Video Output>
Select the color system of the external monitor.
• NTSC/PAL (Initial)
"Please Power Off" appears when the setting is
changed. Turn off the power, then turn on to enable
the change.
<Viewing Angle>
Select the viewing angle in relation to the monitor
panel to make the panel easier to see.
• Under 0° (Initial)/5°/10°/15°/20°

Input settings

Display the <Input> screen.
On the Home screen, touch as follows:
Then, on the <Settings> screen, touch [Input].
E.g. Input settings screen for KW-V440BT
<Rear Camera>
Configure the rear view camera settings.
<Rear Camera Interruption>
• ON (Initial): Displays the picture from the rear view
camera when you shift the gear to the reverse (R)
position.
– A caution message appears on the screen. To
remove the caution message, touch the screen.
• OFF: Select this when no camera is connected.
<Parking Guidelines>
• ON (Initial): Displays the parking guidelines.
• OFF: Hides the parking guidelines.
<Guidelines Setup>
Adjust the parking guidelines according to the size of
the car, parking space and so on.
When adjusting the parking guidelines, make sure to
use the parking brake to prevent the car from moving.
Select the
mark (1), then adjust the position of the
selected
mark (2).
Initialize
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch and hold [Initialize ] for 2 seconds to set all
the marks to the initial default position.
<Navigation>
(Only for KW-V340BT Region 3, KW-V340BTM
Region 2, KW-V440BT Region 3 (except for Indonesian
models), KW-V440BTM Region 2)
Change the settings for displaying the screen of an
external navigation unit.
• To change the setting, turn off the AV source by
touching [AV Off] on the Home screen beforehand.
ENGLISH
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-v440btKw-v340btKw-v440btm

Table of Contents