Advertisement
TECHNICAL DETAILS
Model: OT803RW Tower fan with remote control.
Power: 220-240V 50Hz, 40W.
Weight: 2.4kg.
Dimensions (HxWxD): 800x225x225mm
GENERAL TOWER FAN PARTS
GETTING STARTED
1. Carefully remove the appliance from the plastic bag and the carton, and unwind the cord to its full length.
2. Assemble the base of the fan onto the bottom of the body:
A) Remove the 3 thumb screws on the bottom of the main body.
B) Place the power cord between the two halves of the base and bring them together (plug end should be on the side
of the base feet).
C) Push the base into the bottom of the fan body and align the 3 holes. Attach using the 3 thumb screws.
D) Fix the cord to the underside of the base in the 2 small clips and through the slot that exits close to the rear of the
appliance.
A
3. Place the appliance onto a stable, flat and dry surface.
4. Plug the cord set into a 220-240V~A.C. 50Hz earthed electrical outlet. Turn the power on at the electrical outlet. The blue
Power indicator (next to the Power button) will light up and a beep will sound.
Note: The remote control uses battery type CR2032. To replace, push clip at bottom of remote inwards & pull out battery
holder, replace battery and push holder back in.
FRONT
B
Control panel
Handle
Washable
mesh filter
Air outlet
Air inlet
Non-removable
rear cover
Base
Power cord
C
OMEGA ALTISE
REAR
D
Advertisement
