Table of Contents
Advertisement
10.14.
When the air return channel cover of the freezing compartment is removed by pulling it from the grids in
the front, the tabs are released. For assembly, the tabs are clapped in their slots using force.
All procedures shall be repeated in the reverse order for assembly.
10.15.
Pot board group on the side wall of the body is connected to the body with snap-fit.
Use a screwdriver to loosen snap fit and disconnect the sockets of the cable group to completely remove
the Inner display.
10.16.
Reed sensor board is grouped with the main cable under the reed sensor cover. For disassembling this
group a sharp screwdriver or a box cuter shall be used to loosen the connections of the cover.
For reassembly, the new group shall be mounted in accordance with the direction of the tabs.
10.17.
The cover of the upper hinge shall be removed in accordance with step 16.1. 2 connection screws shall
be removed and the upper hinge will be taken out.
Sensitivity: Public
BEKO THAI NF 60 CM BOTTOM FREEZER REFRIGERATORS
Freezing Compartment Air Return Channel Cover
POT Board Box
Reed Sensor Board
Upper Hinge
09.03.2020 / REV NO: 01
48
Hide quick links:
Advertisement
Table of Contents
