Beko BFBF2414WH Service Manual page 46

10.11. Cover for the Second Level Vegetable Bowl
The second level vegetable bowl groups used in the cooling compartment have two different sections;
the cover and the drawer section. To remove the drawer cover from the drawer body, the following steps
should be followed respectively:
The tabbed structures on the drawer cover are fixed on the bottom of the drawer body. The tabs are
separated from the point where tabs are locked with two sharp and flat devices.
After the bottom section is separated, the user shall start working on the sides. There are two tabs on
the sides; one on the right and one on the left. For the tabs to be disconnected, the tabs shall be
separated with a sharp and flat tool from the openings they are mounted on.
When the tabs are being connected, first the tabs above, than the ones on the side are installed, than
the tabs on the bottom are placed.
10.12.
For demounting the cooling compartment evaporator group, first the square screw stoppers on the right
and the left are removed with a flat head screwdriver. Then, 2 fixing screws are removed with a Phillips
screwdriver. After the screws are taken out, the cover is pulled out. For the cover to be removed from
the body, the cooling evaporator cover group fan socket is removed from the socket seat of the frame.
Sensitivity: Public
BEKO THAI NF 60 CM BOTTOM FREEZER REFRIGERATORS
Cooling Compartment Evaporator Cover Group
09.03.2020 / REV NO: 01
46