Morphy Richards FoodFusion Manual page 9

47060 rev5_47060 Rev 1 20/09/2011 12:24 Page 9
Disengage the frother system
5
from the jug by turning the
frother control lever ‰ to the
left Q, the motor will stop
automatically. Push and
release the milk hot plate
switch to turn off the hot
plate Â.
WARNING: Take care, the
milk will be very hot.
Remove the milk jug fl from
the hot plate and press the
lid release button Í to
disengage the lid. The lid
assembly can be removed for
easy pouring and spooning
off the milk.
NOTE: The lid can be turned
upside down and rest on the
work surface. The inner lid is
shaped to collect any
dripping milk and froth for
minimal mess.
Pour the coffee into the cups
and then gently pour or
preferably spoon the milk
onto the coffee.
WARNING: The stainless
steel jug and the hotplate
will remain hot for
sometime after switching
the machine off.
NOTE: The milk frother jug
and lid can be disassembled
for easy cleaning.
It is recommended that you
disassemble and clean the
milk frother jug and it's
components immediately
after use, as dried milk can
be difficult to remove.
NOTE: All milk jug and coffee
jug components are
dishwasher safe for easy
cleaning.
Cup selection
function
This machine has a special
1
selector that maintains the
quality of coffee brewed in
relation to the number of
cups selected.
9 For details of other Morphy Richards products, please see our website:
There are two options
available:
1 /2
• carafe (1-6 cups - Glass
jug)
(1-5 cups - Thermal jug)
• 1 carafe (7-12 cups - Glass
jug)
(6-10 cups - Thermal jug)
The selection needs to be set
2
in relation to the amount of
water in the water tank and
the amount of coffee powder
in the filter.
The incorrect selection of this
3
function will not affect the
functionality of the machine,
however the quality and taste
of the coffee brewed will be
affected.
If you find the strength
4
selector does not provide a
weak or strong enough cup
of coffee to suit your taste,
the cup selection function
can be used in conjunction to
achieve a stronger or weaker
cup of coffee.
The table R shows the
•
settings to use in relation to
the volume of water in the
tank to help achieve a
stronger or weaker coffee.
Feel free to experiment with
different settings until you
achieve the desired strength
of coffee to suit your own
personal taste.
S
www.morphyrichards.com
Coffee quality
indicator
The coffee quality indicator
will show the quality of the
coffee in the carafe in relation
to the time since brewing
was completed. Quality of
the coffee is a personal
choice. The quality indicator
gives an indication of the
quality and taste of coffee
after the brewing process is
complete.
It is not absolute and can
differ due to personal taste or
the type of coffee used.
The graph shown below S
gives an indication of the
relation between each
segment of the display in
relation to both quality and
time.
R
1-6 7-12
1-5 6-10
1/2 Standard Stronger
1
Weaker Standard
C B
D
E
A
9
9