Contents 1. Packing list 2. Product appearance Quick Start Guide 3. Quick start 4. Power on/off and network congiguration 5. Set up the camera 6. Install the camera 7. Share the camera 8. Charge the camera 9. Indicator light status 10.
Product appearance Threaded bracket interface Microphone Spotlight Strong magnetic Infrared light chuck Lens Speaker Backshell Indicator light open button Ambient light Human body sensor infrared sensor Micro-USB port Power button...
Quick start The wireless smart battery camera supports battery- powered supply and AC-powered supply. 1. Download and install the App The wireless smart battery camera supports Android and iOS App. For your best experience, please scan the QR code below with your mobile phone, install the app, and follow the instruction to complete the user registration.
Set up the camera 2. Add the device Sign in to App,connect to Wi-Fi and add the device according to the prompts (please bring the device close 1) Click the "Add device" in the App and enter the Wi-Fi network name and password that you want the camera to connect.
Page 6
To ensure a longer distance connection, the camera only 2) After pressing the camera switch for 3 seconds, the supports the 2.4Ghz Wi-Fi with stronger wall penetration camera will turn on. At this moment, target the camera capability and does not support Wi-Fi for enterprise- at the QR code of the mobile App, with a distance of level authentication currently.
Page 7
3) After a while, the camera will give out a prompt sound Possible problems with binding: of a successful connection. At this moment, please set the name for the device on the App and select the When you hear the "Wi-Fi Password Error", please location you want to place the device.
Install the camera (2) Install the bracket You can place the camera on a shelf or other surfaces to use, or you can install it on a wall to use. Remove the protective film on one side of the 3M adhesive and stick it to the mounting surface of the (1) Select a good spot for your camera bracket.
Share the camera (3) Adjust the angle Attach the camera to the magnetic bracket, the best angle is about 15 degrees downward, then adjust the When you need to view the camera with other family surveillance angle. members or friends, you can use this function. Only the administrator whose account is bound with the camera for the first time can share and set the device.
2) Click "Camera sharing", and a QR code will be generated for 4) Scan the QR code on your mobile phone, and you will sharing. sharing will be completed after you agree. Charge the camera App will remind you to charge your camera when the battery is low.
Indicator light status Firmware upgrade Mode Status When you connect your camera through the App, it will prompt you if the latest firmware is available. You Working mode Blue can also manually check the firmware upgrade in the Sleep mode settings of the App.
FCC warning -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. This device complies with part 15 of the FCC Rules. -- Connect the equipment into an outlet on a circuit Operation is subject to the following two conditions: different from that to which the receiver is connected.
Page 13
6.Q:What is the maximum length of recording time? A: On Apple devices with iOS13 and above, you need to turn on the "location permission" for the app in the A: If you set the duration as "Auto", when someone system settings and change it to "allow when using." occurs in the view of the camera, it will start recording a video for up to 3 minutes.
Need help?
Do you have a question about the LongPlus and is the answer not in the manual?
Questions and answers