Symbols Used In This Document; Product Introduction; Introduction; Delivery And Handling - Grundfos Comfort 595916 Installation And Operating Instructions Manual

Hot water recirculation system
Table of Contents

Advertisement

2. Symbols used in this document

Warning
If these safety instructions are not
observed, it may result in personal
injury.
Warning
If these instructions are not
observed, it may lead to electric
shock with consequent risk of
serious personal injury or death.
If these safety instructions are not
observed, it may result in
Caution
malfunction or damage to the
equipment.
Notes or instructions that make the
Note
job easier and ensure safe
operation.

3. Product introduction

3.1 Introduction

All Grundfos Comfort Systems are carefully
inspected and tested before shipment in order to
ensure long, efficient, trouble-free service.
For maximum performance and reliability,
please follow the instructions in this manual.
Warning
This is not an anti-scald device.
After installation, you may find
some warm water in the cold water
line at the sink where the valve is
installed. Once the cold water line
is opened, the warm water will
dissipate in a very short time.
Warning
For indoor use only.
A Grundfos Comfort System hot water
recirculation system is designed to bring hot
water in an instant to the hot water faucets in
your home.
Since the system utilizes the existing cold water
return line in the home, no separate new return
line is required. No electricity is required under
the sink.
The Grundfos Comfort System includes a
circulator pump that installs on the water heater
in your home, plus a valve that installs at the
furthest faucet.
The direction of flow moves from the water
heater through the recirculation pump, through
the hot water supply line, and then back to the
water heater through the existing cold water
return line.
6
5
4
Fig. 1
Grundfos Comfort System
Pos.
Description
1
Pump body
2
Faceplate
3
Flex hoses
4
Undersink, Thermal Bypass Valve
5
Line cord
6
Timer
7
3/4" NPT discharge port

3.2 Delivery and handling

Examine the components carefully to make sure
no damage has occurred to the pump during
shipment. Take care to ensure the pump is
NOT dropped or mishandled; dropping will
damage the pump.
Kit includes:
One Grundfos UP15 circulator with 24-hour
timer and line cord
one Undersink, Thermal Bypass Valve
two valve mounting screws
two 1/2" FNPS X 1/2" FNPS X 12", flex
hoses
one Installation and Operating Instructions.
7
1
2
3
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents