Screen Control; Reset Calibration; Backlight Adjust; Gamma Select - Hitachi VF-PBM209 Operating Instructions Manual

SCREEN CONTROL

Reset Calibration

Backlight Adjust


Inverter dimming Level select (0~100)

Gamma Select

 Gamma Level Select: (0.8 = high λ ~ 3.0 = low λ)

I/P Mode

 Line Doubler/Inter-Field/Field Merge function on/off

Dithering

Internal Pattern

Color Calibration Reset.

Prompt: _ _ _ _
 NOTE: A 4-digit code is needed to activate this
function. Please contact your nearest HITACHI or
PLURA representative.
 Dithering 1-bit/2-bit/3-bit/off function on/off
 100% Color Bars, 75% Color Bars, Luma, RGB,
White, Black, RED, Blue, Green
NR (Noise Reduction)

 Noise Reduction on/off (NR is for Video signal HD-
SDI, Composite, S-Video, Y/Pb/Pr, DTV timing)
Page 22 of 32