Page 2
RECOMMENDED TOOLS Phillips Screwdriver Channel Locks Plumbers' Putty or Caulking Regular Screwdriver Teflon Tape Tubing Cutter Adjustable Wrench ROUGHING-IN ROUGHING-IN DIMENSIONS CAUTION Turn off water at main supply. For reference NOTE When soldering, remove PLASTER GUARD, CARTRIDGES and CHECK STOPS (IF PRESENT). When finished soldering, flush valve body, replace FINISHED WALL cartridges, check stops (if present) and plaster guard to continue installation.
Page 3
ADJUST HOT LIMIT STOP (MUST BE DONE PRIOR TO TRIM INSTALLATION) By restricting HANDLE rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP (1) reduces risk of accidental scalding. To set the maximum hot water temperature of your faucet, all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP (1).
Page 4
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products. In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased 8404 Killam Blvd.