Table of Contents
Advertisement
8 Other features
Connect to external
speakers or headphones
Connect external speakers or headphones to
the projector. With this connection, audio from
the projector is played through the external
speakers or headphones.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the projector.
Do not use the projector over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.
1
Using a 3.5 mm audio cable, connect the
connector on the projector to the analogue
audio input (3.5 mm jack, or red and white
jacks) on the external speakers. Or connect
the
connector on the projector to
headphones.
•
The speakers of the projector are
deactivated automatically when the
external speakers or headphones are
connected to the projector.
HDMI
2
When connecting to the headphones, use
the volume control on the remote control to
adjust the volume to a comfortable level.
Other features
SPDIF
DC
USB
Use easy link
This projector supports easy link which uses
the HDMI CEC (Consumer Electronics Control)
protocol. You can use a single remote control
to turn on or off the easy link compliant
devices that are connected through HDMI.
The manufacturer does not guarantee 100%
interoperability with all HDMI CEC devices.
1
Make sure the projector is connected to an
HDMI device which supports HDMI CEC
function (see Connect to devices through
HDMI, page 15).
2
To activate easy link function on this
projector, press
settings menu and select CEC - On.
to access the
17
Advertisement
Table of Contents
