EPSON Setup Overview 1. See your EPSON your printer software on each computer that will print over the network. 2. Attach the AXIS 1440 Print Server to your connect it to the network. 3. Set up the AXIS 1440 Print Server for your network.
NetWare network. See the AXIS 1440 User’s Manual for more information. Notes: Install your EPSON printer software and connect the AXIS 1440 to your printer and network before you begin this procedure. Close all applications before you begin this procedure.
Page 5
Close. Important! If the Installing AXIS Printer Ports wizard appears on your screen, close it. Do not try to install your printer this way. 5. Restart your system. To install the software for Windows 3.1 or 3.1x: 1. With Windows running, insert the AXIS Utilities disk 1 in your diskette drive.
Page 6
3. Choose Network from the Setup menu. The Network Environments window opens. From this window, you can create new print queues, delete queues, connect to previously established queues, and choose whether printers operate in Remote Printer or Print Server mode.
3. Click the Details tab. 4. If your network supports NetBIOS/NetBEUI: • Select the AXIS printer port from the ports list and click OK. The port name appears as <name>.LP1, where <name> is AX followed by the last six digits of the AXIS 1440 serial number (for example, AX560B35).
Page 8
5. Select your network protocol and click OK. 6. If your network supports NetBIOS/NetBEUI: • Select the AXIS printer port from the ports list and click OK. The port name appears as <name>.LP 1, where <name> is AX followed by the last six digits of the AXIS 1440 serial number (for example, AX560B35.LP1).
<port> is LPT1 (for example, AXIS100086_LPT1). 4. Click the printer name. By doing so you will detect if the AXIS 1440 is correctly connected to the printer. 5. Use the radio buttons to enable or disable background printing.
• EPSON Home Page on the Internet (http://www.epson.com) • EPSON FTP site on the Internet (log in to ftp.epson.com as anonymous FTP) For more information about how to update the software, see Section 10 in the AXIS 1440 User’s Manual.