Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for MacAllister MSCD18-Li-2
Summary of Contents for MacAllister MSCD18-Li-2
- Page 1 18V Combi Drill MSCD18-Li-2 EAN: 3663602798446/EAN.3663602798453 WARNING: Read the instructions before using the product!
-
Page 2: Table Of Contents
MSCD18-Li-2 Let’s get started... These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting Started... Safety information Symbols Your product Technical specifications Before you start more detail... Intended use Product functions... -
Page 3: Safety Information
Safety information MSCD18-Li-2 Safety warnings General power tool safety warnings WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - Page 4 Safety information MSCD18-Li-2 > Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. > Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
- Page 5 Safety information MSCD18-Li-2 > Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. > Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts.
- Page 6 Safety information MSCD18-Li-2 > Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools .
- Page 7 Safety information MSCD18-Li-2 > Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Page 8 Safety information MSCD18-Li-2 fasteners may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. Additional safety warnings for charger > This charger can be used by children aged from 8 years and...
- Page 9 Safety information MSCD18-Li-2 > Do not use the charger if it has been subjected to a heavy knock, dropped or otherwise damaged in any way. Have the charger checked and repaired by an authorised service centre. Additional safety warnings for battery packs >...
- Page 10 Safety information MSCD18-Li-2 The following information applies to professional users only but is good practice for all users: ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST The updated Control of Substances Hazardous to Health Regulations 1st October 2012 now also targets to reduce the risks associated with silica, wood and gypsum dusts.
- Page 11 Safety information MSCD18-Li-2 1. Reduce the amount of cutting by using the best sizes of building products. 2. Use a less powerful tool e.g. a block cutter instead of angle grinder. 3. Using a different method of work altogether – e.g. using a nail gun to direct fasten cable trays instead of drilling holes first.
- Page 12 Safety information MSCD18-Li-2 VIBRATION The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm vibration syndrome injuries to power tool users. The directive requires power tool manufacturers and suppliers to provide indicative vibration test results to enable users to make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool.
- Page 13 Safety information MSCD18-Li-2 While working with this power tool, hand/arm vibrations occur. Adopt the correct working practices in order to reduce the exposure to vibration. This tool may cause hand-arm vibration syndrome if its use is not adequately managed. Warning: Identify safety measures to protect the operator that...
- Page 14 Safety information MSCD18-Li-2 > Always be alert when using this product, so that you can recognise and handle risks early. Fast intervention can prevent serious injury and damage to property. > Switch off and disconnect from the power supply if there are malfunctions.
-
Page 15: Symbols
Symbols MSCD18-Li-2 Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. Volt, (alternating voltage) ºC... - Page 16 Symbols MSCD18-Li-2 The product complies with the applicable European directives and an evaluation method of conformity for these directives was done. WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
-
Page 17: Your Product
Your product MSCD18-Li-2 Your product 1. Work light 8. Battery pack 2. Keyless chuck 9. Release button 3. Torque adjustment ring 10. Power / charging status indicator light 4. Two-speed gear control 11. Charging base 5. Forward/Reverse rotation control switch 12. -
Page 18: Technical Specifications
: 1.5 m/s The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are necessary. Rating Label Explanation MSCD18-Li-2 = MODEL NUMBER MS = MacAllister(Brand) CD = Combi drill 18 = 18Volts Li = Lithium Ion battery... -
Page 19: Before You Start
Before you start MSCD18-Li-2 Before you start Unpacking 1. Unpack all parts and lay them on a flat, stable surface. 2. Remove all packing materials and shipping devices if applicable. 3. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer. - Page 20 Before you start MSCD18-Li-2 Inserting > Turn the chuck sleeve (2) anticlockwise until the chuck jaws are opened wide enough to insert the drill bit (Fig. 1). > Insert the drill bit all the way to the stop (Fig. 2). If using a 25 mm driver bit, insert it into the socket of a bit holder.
- Page 21 Before you start MSCD18-Li-2 Battery pack Release / Attach > Lock the ON/OFF switch (6) to avoid accidental starting by moving the forward / reverse rotation control (5) into the middle position (see section “Product functions – Forward / reverse rotation control”).
- Page 22 Before you start MSCD18-Li-2 > Slide the battery pack (8) into the charger base (11) until it locks in place (Fig. 6). > Connect the charger (12) to the power supply. The indicator light (10) lights in red when battery is charging and green when charging is finished.
-
Page 23: In More Detail
MSCD18-Li-2 more detail... Intended use Product functions General operation Care and maintenance Trouble shooting Recycling and disposal Guarantee EC declaration of conformity... -
Page 24: Intended Use
Intended use / Product functions MSCD18-Li-2 Intended use The product is intended for driving in and loosening screws as well as for drilling in wood, metal, plastic, and for impact drilling in brickwork/masonry. It should not be used for working on materials that are dangerous to health. It must not be used for tightening or loosening car wheel nuts. - Page 25 Product functions MSCD18-Li-2 > Move the forward / reverse rotation control switch (5) to the right (as seen from the operator’s position) in order to use the product in anticlockwise rotational mode (Fig. 10). > Move the forward / reverse rotation control switch (5) to the center position to lock the on/off switch and avoid accidental starting (Fig.
- Page 26 Product functions MSCD18-Li-2 Automatic work light (Fig. 12) The work light (1) will automatically illuminate by pressing the ON/OFF switch (6). Fig. 12 WARNING! Do not look directly into the light. Two-speed gear control The two-speed gear control (4) is used to switch between two working modes. When the gear is set to position 1, the speed will decrease and the drill will have greater power and torque.
- Page 27 Product functions MSCD18-Li-2 WARNING! To prevent gear damage, always allow the chuck to come to a complete stop before changing the direction of rotation or the two-speed gear control. When overload occurs frequently on the high speed gear, switch to the low speed gear to avoid the motor overheating.
- Page 28 Product functions MSCD18-Li-2 Automatic spindle lock (Fig. 15) The automatic spindle lock allows you to use it as a regular screwdriver. You can give an extra twist to firmly tighten a screw, loosen a very tight screw or continue working when the battery energy has expired.
-
Page 29: General Operation
General operation MSCD18-Li-2 General operation > Check the product, its battery pack and charger as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. > Double check that the accessories and attachments are properly fixed. - Page 30 General operation MSCD18-Li-2 Drilling into brickwork/masonry > An impact drill is ideal for drilling in normal masonry. If you want to drill into very hard concrete, you may require a rotary hammer. > Use an inspection device to ensure that you do not accidentally drill into a cable or pipe.
-
Page 31: Care And Maintenance
Care and maintenance MSCD18-Li-2 Care and maintenance After use > Switch the product off, remove the battery pack and let it cool down. > Check, clean and store the product as described below. The golden rules for care WARNING! Always switch the product off, remove the battery pack and let the... -
Page 32: Troubleshooting
Care and maintenance / Troubleshooting MSCD18-Li-2 Repair This product does not contain any parts that can be repaired by the consumer. Contact an authorised service centre or a similarly qualified person to have it checked and repaired. Storage > Switch the product off and remove the battery pack. -
Page 33: Recycling And Disposal
Recycling and disposal MSCD18-Li-2 Problem Possible cause Solution 1. Product does 1.1. Forward / reverse rotation 1.1. Push forward / reverse not start control switch at center rotation control switch to lock position left / right 1.2. Battery pack not properly 1.2. -
Page 34: Guarantee
MSCD18-Li-2 Guarantee At MacAllister we take special care to select high quality materials and use manufacturing techniques that allow us to create ranges of products incorporating design and durability. That’s why we offer a 2 year guarantee against manufacturing defects on our MacAllister power tool products. -
Page 35: Ec Declaration Of Conformity
Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom Declare that the product: 18V cordless combi drill MSCD18-Li-2 Serial number: 000001-999999 Complies with the essential health and safety requirements of the following directives: 2006/42/EC The Machinery Directive... - Page 36 Manufacturer • Fabricant • Producent • Hersteller • Producator • Fabricante: Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom www.kingfisher.com/products Distributor: B&Q plc, Chandlers Ford, Hants, SO53 3LE United Kingdom www.diy.com Screwfix Direct Limited, Trade House, Mead Avenue, Yeovil, BA22 8RT, United Kingdom www.screwfix.com To view instruction manuals online,...