Related Manuals for MacAllister MSDD18-Li-2
Summary of Contents for MacAllister MSDD18-Li-2
- Page 1 18V Cordless Drill MSDD18-Li-2 EAN: 3663602798675 WARNING: Read the instructions before using the product!
-
Page 2: Table Of Contents
MSDD18-Li-2 Let’s get started... These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting Started... Safety information Symbols Your product Technical specifications Before you start more detail... Intended use Product functions... -
Page 3: Safety Information
Safety information MSDD18-Li-2 Safety warnings General power tool safety warnings WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - Page 4 Safety information MSDD18-Li-2 > Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. > Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
- Page 5 Safety information MSDD18-Li-2 > Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. > Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts.
- Page 6 Safety information MSDD18-Li-2 > Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools .
- Page 7 Safety information MSDD18-Li-2 > Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Page 8 Safety information MSDD18-Li-2 fasteners may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. Additional safety warnings for charger > This charger can be used by children aged from 8 years and...
- Page 9 Safety information MSDD18-Li-2 > Do not use the charger if it has been subjected to a heavy knock, dropped or otherwise damaged in any way. Have the charger checked and repaired by an authorised service centre. Additional safety warnings for battery packs >...
- Page 10 Safety information MSDD18-Li-2 The following information applies to professional users only but is good practice for all users: ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST The updated Control of Substances Hazardous to Health Regulations 1st October 2012 now also targets to reduce the risks associated with silica, wood and gypsum dusts.
- Page 11 Safety information MSDD18-Li-2 1. Reduce the amount of cutting by using the best sizes of building products. 2. Use a less powerful tool e.g. a block cutter instead of angle grinder. 3. Using a different method of work altogether – e.g. using a nail gun to direct fasten cable trays instead of drilling holes first.
- Page 12 Safety information MSDD18-Li-2 VIBRATION The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm vibration syndrome injuries to power tool users. The directive requires power tool manufacturers and suppliers to provide indicative vibration test results to enable users to make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool.
- Page 13 Safety information MSDD18-Li-2 While working with this power tool, hand/arm vibrations occur. Adopt the correct working practices in order to reduce the exposure to vibration. This tool may cause hand-arm vibration syndrome if its use is not adequately managed. Warning: Identify safety measures to protect the operator that...
-
Page 14: Symbols
Symbols MSDD18-Li-2 Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. Volt, (alternating voltage) ºC... - Page 15 Symbols MSDD18-Li-2 The product complies with the applicable European directives and an evaluation method of conformity for these directives was done. WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.
-
Page 16: Your Product
Your product MSDD18-Li-2 Your product 1. Work light 8. Battery pack 2. Keyless chuck 9. Release button 3. Torque adjustment ring 10. Power / charging status indicator light 4. Two-speed gear control 11. Charging base 5. Forward/Reverse rotation control switch 12. -
Page 17: Technical Specifications
: 1.5 m/s The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are necessary. Rating Label Explanation MSDD18-Li-2 = MODEL NUMBER MS = MacAllister(Brand) DD = Drill/Driver 18 = 18 Volts Li = Lithium Ion battery... -
Page 18: Before You Start
Technical specifications / Before you start MSDD18-Li-2 Before you start Unpacking 1. Unpack all parts and lay them on a flat, stable surface. 2. Remove all packing materials and shipping devices if applicable. 3. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer. - Page 19 Before you start MSDD18-Li-2 WARNING! Always use drill bits according to the intended use! For example, never use a drill bit intended for working on wood for working on metal or vice versa! Observe the technical requirements of this product (see section Technical...
- Page 20 Before you start MSDD18-Li-2 Battery pack Release / Attach > Lock the ON/OFF switch (6) to avoid accidental starting by moving the forward / reverse rotation control (5) into the middle position (see section “Product functions – Forward / reverse rotation control”).
- Page 21 Before you start MSDD18-Li-2 > Slide the battery pack (8) into the charger base (11) until it locks in place (Fig. 6). > Connect the charger (12) to the power supply. The indicator light (10) lights in red when battery is charging and green when charging is finished.
-
Page 22: In More Detail
MSDD18-Li-2 more detail... Intended use Product functions General operation Care and maintenance Trouble shooting Recycling and disposal Guarantee EC declaration of conformity... -
Page 23: Intended Use
Intended use / Product functions MSDD18-Li-2 Intended use The product is intended for driving in and loosening screws as well as for drilling in wood, metal, plastic. This product is not intended for impact drilling in brickwork/masonry. It should not be used for working on materials that are dangerous to health. It must not be used for tightening or loosening car wheel nuts. - Page 24 Product functions MSDD18-Li-2 > Move the forward / reverse rotation control switch (5) to the left (as seen from the operator’s position) in order to use the product in a clockwise rotational mode (Fig. 9). > Move the forward / reverse rotation control switch (4) to the right (as seen from the operator’s position) in order to use the product in anticlockwise rotational mode...
- Page 25 Product functions MSDD18-Li-2 Automatic work light (Fig. 12) The work light (1) will automatically illuminate by pressing the ON/OFF switch (6). Fig. 12 WARNING! Do not look directly into the light. Two-speed gear control The two-speed gear control (4) is used to switch between two working modes. When the gear is set to position 1, the speed will decrease and the drill will have greater power and torque.
- Page 26 Product functions MSDD18-Li-2 WARNING! To prevent gear damage, always allow the chuck to come to a complete stop before changing the direction of rotation or the two-speed gear control. When overload occurs frequently on the high speed gear, switch to the low speed gear to avoid the motor overheating.
- Page 27 Product functions MSDD18-Li-2 Automatic spindle lock (Fig. 15) The automatic spindle lock allows you to use it as a regular screwdriver. You can give an extra twist to firmly tighten a screw, loosen a very tight screw or continue working when the battery energy has expired.
-
Page 28: General Operation
General operation MSDD18-Li-2 General operation > Check the product, its battery pack and charger as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. > Double check that the accessories and attachments are properly fixed. -
Page 29: Care And Maintenance
General operation / Care and maintenance MSDD18-Li-2 > Hold the product perpendicular to the screw to be screwed in/out. Holding it at an angle may cause slipping or jamming of the driver bit. > Place the tip of the driver bit directly on the screw first and then switch the product on. -
Page 30: Troubleshooting
Care and maintenance / Troubleshooting MSDD18-Li-2 > Check for worn or damaged parts. Replace worn parts as necessary or contact an authorised service centre for repair before using the product again. Maintenance Before and after each use, check the product and accessories (or attachments) for wear and damage. -
Page 31: Recycling And Disposal
Troubleshooting / Recycling and disposal MSDD18-Li-2 Problem Possible cause Solution 1. Product does 1.1. Forward / reverse rotation 1.1. Push forward / reverse not start control switch at center rotation control switch to lock position left / right 1.2. Battery pack not properly 1.2. -
Page 32: Guarantee
MSDD18-Li-2 Guarantee At MacAllister we take special care to select high quality materials and use manufacturing techniques that allow us to create ranges of products incorporating design and durability. That’s why we offer a 2 year guarantee against manufacturing defects on our MacAllister power tool products. -
Page 33: Ec Declaration Of Conformity
EC declaration of conformity Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom Declare that the product: 18V cordless drill MSDD18-Li-2 Serial number: 000001-999999 Complies with the essential health and safety requirements of the following directives: 2006/42/EC The Machinery Directive... - Page 34 Manufacturer • Fabricant • Producent • Hersteller • Producator • Fabricante: Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom www.kingfisher.com/products Distributor: B&Q plc, Chandlers Ford, Hants, SO53 3LE United Kingdom www.diy.com Screwfix Direct Limited, Trade House, Mead Avenue, Yeovil, BA22 8RT, United Kingdom www.screwfix.com To view instruction manuals online,...