Epson Stylus Color 640 Manual page 4

EPSON Stylus COLOR 640
Mechanical
Paper feed
method Friction
Paper path Sheet feeder, top entry, front out
Sheet feeder
capacity 100 sheets of 17 lb (64 g/m
Dimensions
Storage Width: 16.9 inches (429 mm)
Depth: 9.1 inches (231 mm)
Height: 6.1 inches (157 mm)
Printing Width: 16.9 inches (429 mm)
Depth: 23.7 inches (602 mm)
Height: 11.6 inches (295 mm)
Weight 11.5 lb (5.2 kg) without the ink cartridges
Electrical
Specification 120 V Model
Input voltage 99 to 132 V
range**
Rated frequency
range
Input frequency
range
Rated current 0.4 A (max. 0.5 A)
Power Approx. 15 W (ISO/IEC 10561 Letter Pattern)
consumption Approx. 5 W in standby mode
Energy Star compliant
* This product is also designed for an IT power system phase-to-
phase voltage of 220 240 V.
** Check the label on the back of the printer for your printer's
voltage.
Environmental
Temperature
Operation 50 to 95 °F (10 to 35 °C)
Storage 4 to 140 °F ( 20 to 60 °C)
1 month at 104 °F (40 °C)
Transit* –4 to 140 °F (–20 to 60 °C)
120 hours at 140 °F (60 °C)
Humidity (without condensation)
Operation 20 to 80% RH
*
Storage 5 to 85% RH
*Stored in shipping container
4 - EPSON Stylus COLOR 640
2
) paper
220 240 V Model*
198 to 264 V
50 to 60 Hz
49.5 to 60.5 Hz
0.2 A (max. 0.3 A)
Safety Approvals
Safety standards UL 1950 with D3, CSA C22.2 No. 950
with D3
EMC FCC part 15 subpart B class B, CSA
C108.8 class B
Parallel Interface
Your printer is equipped with an 8-bit parallel interface with
the following characteristics:
Forward channel
Data format:
Synchronization:
Handshake timing:
Signal level:
Connector:
Reverse channel
Transmission mode:
Adaptable connector:
Synchronization:
Handshaking:
Signal level:
Data transmission timing: Refer to the IEEE-1284
7/98
8-bit parallel, IEEE-1284
compatibility mode
STROBE pulse
BUSY and ACKNLG signals
TTL compatible
57-30360 Amphenol connector or
equivalent
IEEE-1284 Nibble mode
57-30360 Amphenol connector or
equivalent
Refer to the IEEE-1284
specification
Refer to the IEEE-1284
specification
IEEE-1284 Level 1 device
specification