Time; Childproof Lock; Changing The Basic Settings - Bosch HGD745255N Instruction Manual

Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The symbol for the time
function in the foreground is in brackets.
To view the timer , the cooking time
U
the actual time , press the
0
brackets are around the required symbol. The corresponding
value will be shown for a few seconds on the display panel.

Time

Once the oven has been connected or after a power cut, a
flashing symbol and four zeros are shown on the display
0
panel. Set the time.
Press the button.
0
1.
The display panel displays the time

Childproof lock

The oven includes a childproof lock to prevent it being turned
on accidentally.
The oven does not react to any setting. The timer and time can
be programmed when the childproof lock is on.
When the heating type and temperature or grill level are
programmed, the childproof lock turns off the heating.
Activating the childproof lock
No cooking time or end time should already be set.

Changing the basic settings

This oven has different basic settings. The settings can be
adapted to the user's own needs.
Basic settings
Time indicator
™‚
Duration of signal
™ƒ
after the cooking
time or the time set
on the timer has
elapsed
Time until a setting is
™„
applied
* Default setting
No other time function can be programmed.
Press the 0 button for approximately 4 seconds.
1.
The display panel will show the current basic setting for the
time, e.g. for the Selection
™‚
Set the basic setting using the buttons
2.
Confirm with the 0 button.
3.
The display panel shows the following basic setting. Using
the button select the levels and using the buttons
0
make the setting.
Press the button for approximately 4 seconds.
0
4.
All basic settings have been applied.
The basic settings can be changed again at any time.
, the end time
r
sensor repeatedly until the
0
‚ƒ . ‹‹ .
‚ ƒ Selection
Selection Selection
„
always* only with -
the
button 0
approx. approx. approx.
10 sec 2 min.* 5 min
approx. approx. approx.
2 sec 5 sec.* 10 sec.
.
‚
@ or A .
Set the time with the buttons
2.
The programmed time is displayed after a few seconds.
Changing the time
No other time function can be programmed.
or
p
Press the
0
1.
The time symbols light up on the display panel, the brackets
are located next to
Adjust the time with the buttons
2.
The programmed time is displayed after a few seconds.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Press the
D
The display panel shows the symbol
now activated.
Turning off the childproof lock
Press the D
The D symbol in the display panel goes off. The childproof
lock is now deactivated.
or
@ A
or .
@ A
button four times.
.
0
or
@
button for approximately four seconds.
D
button for approximately four seconds.
.
A
. The childproof lock is
17