How To Enter Service Mode - Panasonic TH-43JX800 Technical Manual

How to enter Service Mode

Android models are different procedure from previous models about entering Service Mode.
Model
Only TX/TC-**GX7##, TH-**GX6##
(series)
(2019 model)
Mode
Service While pressing [Volume ( - )] button of
Mode the main unit,
press [RED] button of the remote
control 3 times for about more than 2
sec. (press slowly)
Self-Check While pressing [Volume ( - )] button of
(only the main unit,
information press [Blue] button 1 time
display)
Self-Check While pressing [Volume ( - )] button of
(with the main unit,
shipping press [MENU] button for more than 5
condition) sec
LCD Panel While pressing [Volume ( - )] button of
Test Mode the main unit,
press [Yellow] button of the remote
control 3 times for about more than 2
seconds (press slowly)
Hotel Mode While pressing [Volume ( - )] button of
the main unit,
press [AV] button of the remote control
3 times
How to access to each mode.
JZ and JX(other than right models)
Same as previous model
While pressing [Volume ( - )] button of
the main unit,
press [RED] button of the remote control
3 times within 2 sec.
While pressing [Volume ( - )] button of
the main unit,
press [Blue] button 1 time
While pressing [Volume ( - )] button of
the main unit,
press [MENU] button for more than 3 sec
While pressing [Volume ( - )] button of
the main unit,
press [Yellow] button of the remote
control 3 times.
Only GZ series,
special pattern is displayed when press
[OK] button of the remote control after
above step.
While pressing [Volume ( - )] button of
the main unit,
press [AV] button of the remote control 3
times
- Operation of the remote control is not possible due to system startup when the LED is blinking orange.
You can use the remote control after the LED turns red on.
Only JX700/800-83#**, JX900W
(Android TV)
* This mode is not used.
Press [Volume ( - )] button of the main unit,
press [RED] button of the remote control 3 times
(Do not keep pressing the Volume (-) button, just
press once. Press each key within 1 sec. )
Press [Volume ( - )] button of the main unit,
press [Blue] button of the remote control 3 times
(Do not keep pressing the Volume (-) button, just
press once. Press each key within 1 sec. )
Press [Volume ( - )] button of the main unit,
press [MENU] button of the remote control 3
times
(Do not keep pressing the Volume (-) button, just
press once. Press each key within 1 sec. )
Press [Volume ( - )] button of the main unit,
press [Yellow] button of the remote control 3
times
(Do not keep pressing the Volume (-) button, just
press once. Press each key within 1 sec. )
Press [Volume ( - )] button of the main unit,
press [INPUT] button of the remote control 3
times. The setting menu will appear.
After setting, select start Hotel mode to ON.
(Do not keep pressing the Volume (-) button, just
press once. Press each key within 1 sec. )
Refer to next page.
29