Epson Stylus C64 Start Here Manual

Epson stylus c64: quick start
Hide thumbs Also See for Stylus C64:

Advertisement

Start Here

EPSON Stylus
1
Unpack
1
Make sure you have all the parts shown here. If any parts are missing,
contact EPSON as described on the back of this sheet.
Paper support
2
Remove any tape and packing material inside and around the printer.
The tape may be in slightly different places on your printer, so check
carefully.
3
Slide the paper support into the slot on the back of the sheet feeder.
The paper support should fit securely.
2 2
Power On
1
Connect the printer's power cord
to the printer, then plug it into a
grounded electrical outlet.
2
Press the printer's power
comes on.
Caution: Use only the printer's
printer on and off.
®
Printer
Power cord
Do not touch
or remove the
white cable
button until the green power light
C64
Software
CD-ROM
power button to turn the
Quick Guide
Ink cartridges
Remove tape
and insert

Advertisement

Table of Contents
loading

Summary of Contents for Epson Stylus C64

  • Page 1: Start Here

    EPSON Stylus Unpack Make sure you have all the parts shown here. If any parts are missing, contact EPSON as described on the back of this sheet. Paper support Remove any tape and packing material inside and around the printer.
  • Page 2: Install Ink Cartridges

    Install Ink Cartridges Lower the printer’s output tray, pull out the extension and open the cover. Shake the package of ink cartridges four or five times. Then remove the cartridges from the package. (Don’t shake them after removing the packaging.) Open the cartridge cover.
  • Page 3: Connect The Printer

    Caution: Don’t turn off the printer while the green is flashing, unless the printer hasn’t moved or made noise for more than 5 minutes. Connect the Printer Make sure your computer is turned off. Keep it turned off until section 6, “Install Software.”...
  • Page 4: Install Software

    Note: If a screen like this doesn’t appear, make sure your printer is turned on and connected. Put the EPSON CD in your CD-ROM or DVD drive and wait a few seconds for the CD to be recognized. Your printer software installs automatically and various messages appear on the screen.
  • Page 5: Windows 2000

    Note: If a screen like this doesn’t appear, make sure your printer is turned on and connected. Put the EPSON CD in your CD-ROM or DVD drive and wait a few seconds for the CD to be recognized. Click Next on the Found New Hardware Wizard Screen.
  • Page 6 Make sure your printer is connected and turned on. Then turn on your computer. Put the EPSON CD in your CD-ROM or DVD drive and wait a few seconds for the CD to be recognized. If the CD-ROM window doesn’t open automatically, double-click the EPSON CD-ROM icon.
  • Page 7: Mac Os X

    Open the Applications folder on your hard drive, then open the Utilities folder and select Print Center. Select Stylus C64 in the Printer List window and click the Add icon. Note: If you don’t see your printer in the Printer List, make sure the printer is turned on and connected.
  • Page 8 EPSON Stylus C64 in SoundAdvice. How To Get Paper and Ink Use genuine EPSON inks and paper to get the best results from your EPSON printer! You can purchase ink cartridges, paper, and accessories from your local retailer or from the EPSON Store www.epsonstore.com (U.S.

Table of Contents