Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
Connecting a USB device
Insert a USB key inside the connector.
Remark: Depending on the capacity of the device, the reading can take more than
1 minute.
The unit cannot read my USB device.
-
Once you have plugged your device to the unit, you may need to switch
on the USB device before it can operate.
-
This unit does not support a direct USB connection with a computer. You
need to use a USB device, or a MP3 player.
-
If you are using a USB external hard disk: you need to connect your
device simultaneously to an external power source and to the unit. If you are
using a self-powered PMP, make sure that the battery is sufficiently loaded.
-
Check that the files system of your USB device is formatted into the FAT
or FAT 32 format. USB device formatted into NTFS are not compatible with this
unit. Caution: if you attempt to modify your file system, formatting your device
will erase all data. Please refer to your USB device's instruction manual first.
Connecting a memory card
Insert a compatible memory card inside the connector.
Remark: Depending on the capacity of the device, the reading can take more than
1 minute.
The unit cannot read my memory card.
Check firstly that your memory card is compatible with the unit. Supported
memory cards are SD, SDHC, MMC formats. We have tested this unit with most of
the market's memory cards ; we cannot however guarantee a full compatibility
with all the cards in the market because of the multiple technology standards in
use. Should you have a compatibility problem: please use a memory card with a
lower capacity (2GB or lower) or else connect the unit through a USB device.

RADIO RECEPTION

1.
Set the Function Selector (2) to the "RADIO" position.
2. Set the Band Selector (14) to either "AM", "FM" or "FM Stereo" for the desired
radio band. To receive a weak (noisy) FM station, set the Band Selector to the
"FM" position. The reception may be improved, but the sound will be monaural
(MONO).
3. Adjust the Tuning Knob (13) to obtain the desired radio station.
User's Manual
12
E N

Advertisement

Table of Contents
loading

Table of Contents