Table of Contents
Advertisement
To change the recording time
period after quick-timer
recording begins
Press QUICK TIMER until the
desired time period appears.
To display the remaining time
period during quick-timer
recording
Press DISPLAY on the Remote
Commander. The recording time
period decreases minute by minute.
To stop quick-timer recording
Press TIMER REC ON/OFF.
Recording Using the Quick-Timer
You can have your video TV start timer recording immediately and
automatically stop recording after a specific time period.
Before you begin
• Switch on the video TV.
• Make sure that the clock is set correctly. If not, see "Setting the clock" on
page 17.
• Make sure that the loaded cassette has its safety tab.
If you are recording
1
Press QUICK TIMER on the video TV.
The "QUICK TIMER 0:00" appears on the screen.
2
Press QUICK TIMER repeatedly to select the recording time period. With
each press, the time period changes as follows:
0:00
0:30
Even if you switch off the video TV, it continues recording.
After the selected time period has elapsed, recording stops automatically.
If you are not recording
1
Switch on the video TV.
2
Insert a cassette with its safety tab.
3
Select the program position which you want to record.
4
Press QUICK TIMER on the video TV.
The "QUICK TIMER 0:00" appears on the screen.
5
Press QUICK TIMER repeatedly to select the recording time period. With
each press the time period changes as follows:
0:00
0:30
The time period turns yellow and recording starts.
Even if you switch off the video TV, it continues recording.
After the selected time period has elapsed, recording stops automatically.
1:00
....
3:30
4:00
1:00
....
3:30
4:00
31
Basic Operations
EN
Advertisement
Table of Contents
