Troubleshooting - KANGYE KYQ-M22 Assembly And Operation Instructions Manual

COOKING GRID
Use a mild soapy water solution. Non-abrasive scouring power can be used on stubborn stains then rinse
with water.
CLEANING THE BURNER ASSEMBLY
Turn the gas OFF at the control knob and disconnect the cylinder.
Remove cooling grate.
Clean the burner with a soft brush or blow clean with compressed air and wipe with a cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper clip).
Inspect burner for any damage (cracks or holes). If damage is found, replace with a new burner. Reinstall
the burner, check to ensure that the Gas valve orifices are correctly positioned and secured inside the
burner inlet (venturi).
SERVICING
Your gas barbecue should be serviced annually by a competent registered person.
TROUBLE SHOOTING
PROBLEM
Burners will not light using
the ignition system
Burner will not light with a
match
Low flame or flashback (fire
in burner tube-a hissing or
roaring noise may be
heard)
POSSIBLE CAUSE
1. gas cylinder is empty
2. faulty regulator
3. obstructions in burner
4. obstructions in gas jets or gas hose
5. electrode wire loose or
disconnected on electrode or
ignition unit
6. electrode or wire is damaged faulty
pushbutton igniter
1. gas cylinder is empty
2. Faulty regulator
3. Obstructions in burner
4. Obstructions in gas jets or
gas hose
1. gas cylinder too small
2. Obstructions in burner
3. Obstructions in gas jets or
gas hose
4. Windy conditions
SOLUTION
1. replace with full cylinder
2. have regulator checked or
replace
3. clean burner
4. clean jets and gas hose
5. reconnect wire
6. change electrode and wire
change igniter
1. Replace with full cylinder
2. Have regulator checked or
replace
3. Clean burner
4. Clean jets and gas hose
1. Use larger cylinder
2. Clean burner
3. Clean jets and gas hose
4. Use BBQ in a more
sheltered position