Troubleshooting - KANGYE KYQ-9340DR Assembly Instructions Manual

Remove cooling grate.
Clean the burner with a soft brush or blow clean with compressed air and wipe with a cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper clip).
Inspect burner for any damage (cracks or holes). If damage is found, replace with a new burner. Reinstall
the burner, check to ensure that the Gas valve orifices are correctly positioned and secured inside the
burner inlet (venturi).
SERVICING
Your gas barbecue should be serviced annually by a competent registered person.
TROUBLE SHOOTING
PROBLEM
Burners will not light using the
ignition system
Burner will not light with a
match
Low flame or flashback (fire in
burner tube-a hissing or
roaring noise may be heard)
4
5
POSSIBLE CAUSE
1.LP gas cylinder is empty
2.faulty regulator
3.obstructions in burner
4.obstructions in gas jets or gas hose
5. electrode wire loose or
disconnected on electrode or
ignition unit
6.electrode or wire is damaged faulty
pushbutton igniter
1.LG gas cylinder is empty
2.Faulty regulator
3.Obstructions in burner
4.Obstructions in gas jets or gas hose
1.LP gas cylinder too small
2.Obstructions in burner
3.Obstructions in gas jets or gas hose
4.Windy conditions
Optional rotisserie
3
1.replace with full cylinder
2.have regulator checked
3.clean burner
4.clean jets and gas hose
5.reconnect wire
6.change electrode and
1.Replace with full
2.Have regulator checked
3.Clean burner
4.Clean jets and gas hose
1.Use larger cylinder
2.Clean burner
3.Clean jets and gas hose
4.Use BBQ in a more
2
SOLUTION
or replace
wire change igniter
cylinder
or replace
sheltered position
1