Safety Approvals - Epson LX-300 Manual

Electrical
120 V
Input voltage range 99 to 132 V
Rated frequency range
Input frequency range
Rated current 0.6 A (maximum
1.4 A depending on
the character type)
Power consumption Approx. 23 W (ISO/IEC 10561 letter pattern)
Energy Star Compliant
Environmental
Temperature
(without condensation)
Operation 41 to 95 °F (5 to 35 °C)
Storage –22 to 140 °F (–30 to 60 °C)

Safety Approvals

120 Volt
Safety UL 60950
standards CSA 60950
EMI FCC part 15 subpart B
class B
CAN/CSA CEI/IEC
CISPR22, class B
CE Marking (230 V model)
Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC
Paper
Use recycled paper, envelopes, and single-sheet multipart forms
only under normal temperature and humidity conditions, as
follows:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 30 to 60% RH
Do not load paper that has been folded or is damaged,
wrinkled, or curled.
220 to 240 V
198 to 264 V
50 to 60 Hz
49.5 to 60.5 Hz
0.3 A (maximum
0.7 A depending on
the character type)
Humidity
(without condensation)
10 to 80% RH
0 to 85% RH
230 Volt
EN 60950
AS/NZS CISPR22, class B
EN 60950
EN 55022 Class B
EN 61000-3-2
EN 61000-3-3
EN 55024
Ordinary single sheets:
paper guide and cut-sheet feeder entry
Width Paper guide
3.9 to 10.1 inches (100 to 257 mm)
Cut-sheet feeder
7.2 to 8.5 inches (182 to 216 mm)
Length Paper guide
3.9 to 14.3 inches (100 to 364 mm)
Cut-sheet feeder
10.1 to 14 inches (257 to 356 mm)
Thickness Paper guide: 0.0025 to 0.0055 inch
(0.065 to 0.14 mm)
Cut sheet feeder: 0.0028 to 0.0055 inch
(0.07 to 0.14 mm)
Weight Paper guide: 14 to 24 lb (52 to 90 g/m
Cut sheet feeder: 18 to 24 lb (64 to 90 g/m
Single-sheet multipart forms:
paper guide entry
Width 3.9 to 10.1 inches (100 to 257 mm)
Length 3.9 to 14.3 inches (100 to 364 mm)
Copies 1 original + up to 4 copies
Thickness 0.0047 to 0.015 inch (0.12 to 0.39 mm)
Weight 12 to 15 lb (40 to 58 g/m
Binding Line-glued at the top or one side of form
Envelopes:
paper guide entry
No. 6: 6.5 × 3.6 inches (165 × 92 mm)
Size
No. 10: 9.5 × 4.1 inches (241 × 105 mm)
Thickness 0.0063 to 0.0205 inch (0.16 to 0.52 mm)
Weight 12 to 24 lb (45 to 90 g/m
Continuous paper (standard and multipart):
rear and bottom entry
Width 4 to 10 inches (101.6 to 254 mm)
Length 4 to 22 inches (101.6 to 558.8 mm)
Copies 1 original + up to 4 copies
Thickness Printable area
0.0025 to 0.015 inch (0.065 to 0.39 mm)
Perforated edges (gathering area)
up to 0.035 inch (0.9 mm)
7/06
Epson LX-300+II
2
)
2 )
2 )
2 )
Epson LX-300+II 3
-