Advertisement
Congratulations on your new
InAlto 60cm Double Dishwasher Drawer!
TH E CONT ROL S
Control Panel
8
8
1
2
3
Operation (Button)
1
Power
Power
Press this button to turn on your dishwasher, the screen will
1
2
light up.
Drawer Selector
Press the button to select either upper drawer or lower drawer
Drawer
3
2
Program Selector
selector
loaded, the corresponding indicator will light up.
Press this button to select the appropriate washing program, the
4
Program
Function Selector
3
selector
selected program indicator will light up.
5
Delay Start
Press the button to select a option, corresponding indicator
Option
will be lit.
Press this button to add a delay start time
4
selector
Press and hold the Option button for 3 seconds in standby
in one-hour increments up to 24 hours.
mode to run the Dry & Fresh option immediately.
Press the button to increase the delay start time. Delay a
6
Child Lock
Delay time
cycle for up to 24 hours in one-hour increments. After setting
5
the delay time, press the Start/Pause button to start.
Pressing this button combination will lock
the control panel. Only the Power button
This option allows you to lock the buttons on the control panel,
so children cannot accidently start the dishwasher by pressing
will remain active.
the buttons on the panel. Only the Power button and Drawer
Child lock
6
selector button remains active.
7
Start/Pause
To lock or unlock the buttons on the control panel, press and
hold the Option button+ Delay button for 3 seconds
simultaneously.
8
Washing Program Display
10
9
Display Screen
Displays the operating drawer, time
remaining, delay time,error code and child
lock indication.
10
Extra Functions Display
1 1
Warning Displays
D E TAI L S
Dimensions (W, D, H mm): 595 × 570 × 820
Warranty: 3 Years (2 + 1 on registration)
M O D E L
/
I D W D 6 0 D S
Q U I C K S T A R T G U I D E
9
10
11
9
10
11
7
4
6
5
7
I N STALL AT IO N
• Preparing the cavity: The cavity for the
dishwasher will need to adhere with the
dimensions in the diagram of page 14 of the
user manual. Please note that the water
supply and power point for the appliance
cannot be in the dishwasher cavity.
• Fit the mounting brackets: Dishwasher
Drawers are unstable until they are secured
to their surrounding cabinetry.
• The dishwasher must be level for proper
dish rack operation and wash performance.
If needed, adjust the feet on each corner to
ensure the appliance sits evenly on the floor.
• For a complete guide, refer to the Installation
Instructions in the user manual, pages 14–21.
C LE AN IN G THE FILTE R SYSTE M
The filter system at the base of the dishwasher
cabinet traps coarse debris from the washing
cycle. The debris over time may cause the
filters to clog. We recommend that you clean
this regularly under running water to ensure
optimal performance of your dishwasher
wash cycles.
For a more detailed guide and other care tips,
refer to the Maintenance & Cleaning section of
your user manual, pages 25–26.
SUPP O RT
Telephone: 1300 11 4357
Email: support@residentiagroup.com.au
I N A L T O . H O U S E
Advertisement
