Washing The Product - Sharp Aquos Zero2 Notes On Usage

• Do not splash water onto the specified charger (sold separately) or optional
accessories when using the equipment and do not use it in places where
water is regularly used such as a bathroom, shower room, kitchen and
lavatory. Doing so may cause fire, burnout, electric shock, a fault, etc. Also,
do not take it in a bathroom etc. even when not charging. Doing so may
cause fire, burnout, electric shock, a fault, etc.

Washing the Product

If any stain, dust, sand, soft drink, etc. is attached to the surface of the
product, gently wipe it off with a cloth and wash the product under a mild
water flow (up to 6 liters/min) of tap water at room temperature (5°C to 35°C)
approximately 10 cm away from the faucet or shower head.
Hold the au IC Card tray so that it does not open, and wash the product with
your hands without using a brush or sponge.
After washing the product, drain water off and then use the product.
• Make sure that the au IC Card tray is securely closed before washing the
product.
• Do not wash the product with a washing machine or an ultrasound bath.
• The external connection jack section are especially subject to stain such as
dust or sand adhesion. Wash away stain carefully so as not to keep it
remaining in the sections. Also, after washing it away, make sure the sections
get sufficiently dried off before using the product. Using the product with
sand or water drops remaining in the jack sections may cause fault.
• When cleaning the external connection jack section, do not use tools such
as a cotton swab or jam a cloth into the jack sections. Doing so may cause
impairment of waterproof/dustproof property etc., resulting in fire, burns, or a
fault.
• Never put the product in a microwave oven for drying it. Doing so may cause
the internal battery to leak liquid, overheat, rupture or ignite. Also, doing so
may cause the product to overheat, emit smoke, ignite or cause destruction
of circuit components.
• Do not expose the product to hot air from a hair dryer or leave it in a high
temperature environment for drying it. Doing so may cause the product to
deform, discolor, get out of order, etc.
- 39 -