Advertisement
3.1.8 Removing the speaker terminal 1 and 2 board
(See Fig.7)
• Remove the top cover, tuner, compulink board and rear panel.
(1) From the top side of the main body, disconnect the wires
from the connectors (CN261, CN461) on the speaker ter-
minal 1 board.
(2) Disconnect the wires from the connectors (CN205, CN262,
CN263) on the speaker terminal 2 board.
(3) Take out the speaker terminal 1 and 2 board from the main
body.
3.1.9 Removing the power transformer
(See Fig.8)
• Remove the top cover.
Reference:
Remove the tie bands bundling the wires.
(1) From the top side of the main body, disconnect the wires
from the connector
CN121
(2) Disconnect the wires from the connector
regulator board 1.
(3) Disconnect the wires from the connector
main amplifier board.
(4) Remove the four screws J and take out the power trans-
former from the main body.
1-8 (No.MB534)
on the primary board.
CN106
on the
CN111
on the
CN262
CN461
CN263
CN205
Speaker terminal 2 board
Speaker terminal 1 board
Fig.7
Primary board
CN121
Power transformer
J
CN106
Regulator board 1
Fig.8
CN261
CN111
Main amplifier board
Advertisement
