Battery Connection - HASWING Cayman B GPS Series Owner's Manual

Battery connection

Fig. 6
Battery connection
24V
Or 1 x
Deep Cycle
Lithium
36V
Or 1 x
Deep Cycle
Lithium
Correct operation of the motor
Deploying and stowing
the motor
Deploying the motor
Press the stow/deploy foot pedal and gently
lower the motor taking care to align the lower
part of the Depth Collar with the Steering
Collar. (Fig. 7)
Stowing the motor
Press the stow/deploy foot pedal, grab the
handle, head or shaft of the motor, lift and
retract , sliding back horizontally until the
motor clicks into the cradle.
The shaft of the Cayman slides smoothly making it easy to deploy and stow. Do
NOT let the motor free-fall when deploying, but gently lower into position,
otherwise damage can occur to the Steering Collar.
Adjusting the motor's depth
Whilst holding the motor by the shaft to
prevent it from accidentally sliding, loosen
the nut on the Depth Collar and lower the
motor to the required depth. Tighten the
nut to secure. (Fig. 8)
When towing the boat with the trolling motor in
place, ALWAYS lock the Depth Collar against the
gearbox and support the shaft near the head.
SUGGESTION
When first using the motor, find the correct
depth for general fishing conditions and using
a permanent marker, place at mark at the top
of the Depth Collar so you can easily set the
depth when you next go fishing.
Correct operation of the motor
Fig. 7
When raising or lowering, keep fingers
clear of all hinges and pivot points.
Fig. 8