Advertisement
Quick Links
Yatai Electric Appliances Co., Ltd
No. 4 Xinlong Street, NanLong Industrial Park
SanXiang, ZhongShan, GuangDong Province, China
Postcode: 528463
Tel: +86 760 86692666
Fax: +86 760 86692996
WWW.HASWING.COM
User Manual for:
50736 Cayman B GPS 55lbs
50737 Cayman B GPS 80lbs
50738 Cayman B GPS 101lbs
Version: V01 Printed in China
Cayman B GPS series
OWNER'S MANUAL
Should your motor be defective or a technical issue
arise, please contact the local Haswing distributor
for assistance. Visit
www.haswing.com
of country distributors.
for the list
Advertisement
Related Manuals for HASWING Cayman B GPS Series
Summary of Contents for HASWING Cayman B GPS Series
- Page 1 Cayman B GPS series OWNER’S MANUAL Should your motor be defective or a technical issue arise, please contact the local Haswing distributor for assistance. Visit www.haswing.com for the list of country distributors. Yatai Electric Appliances Co., Ltd User Manual for: No.
-
Page 2: Product Features
Product features Before operating the motor Before operating the motor Indicator lights (Cayman B Product features GPS model only Only use deep cycle battery or batteries to power the motor. Incorrect or improper use, or connection of the battery could cause damage to the motor. Disconnect the battery when stowing the boat or not using for an extended period. -
Page 3: Propeller Installation
Installation Installing the lift handle and fin Propeller installation Install the drive pin (drive pin and cross-shaped slot in the propeller must align in order to Ensure that the motor is disconnected from the battery before installing components. correctly fit the propeller to the motor), anode, washer and self-locking nut onto the drive shaft. -
Page 4: Battery Connection
Battery connection Correct operation of the motor Battery connection Correct operation of the motor Deploying and stowing the motor Deploying the motor Press the stow/deploy foot pedal and gently lower the motor taking care to align the lower part of the Depth Collar with the Steering Collar. - Page 5 Remote control Using the remote 3. Remote control buttons Speed control Faster Power off Mode signal light Press to activate the motor. Press to adjust the motor’s speed. To stop the motor, Steer left Full speed press to cancel. (Fig. 11) Fig.
-
Page 6: Charging The Remote
Remote charging, pairing & audio signal Troubleshooting 11. Charging the remote Troubleshooting 1. To charge the remote, remove the waterproof plug, connect the USB charging cable. The USB end of the 1. Motor fails to run or lack of power cable has a charging status light - red light indicates Make sure that the power cable from the battery charging, green light indicates charged.