Sunnydaze Decor XSS-455 Instructions

SHALE FALLS OUTDOOR FOUNTAIN
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Assemble on a soft, clean surface to avoid scratching or damaging the finish. Select a smooth, level surface to place the fountain.

Parts

Fountain
Electric Submersible Pump
AC Adapter
1
2

ASSEMBLY

1. Locate the light cable inside the fountain and firmly connect it to the shorter cable on the pump.
2. Connect water tube (pre-assembled inside the fountain) to the pump and place the pump inside the fountain.
3. Run the pump power cable out through the back of the fountain and firmly connect it to the AC adapter.
4. Fill the fountain with enough water to keep the pump fully submerged during operation, approximately 10 L.
5. Plug the power cord into a properly grounded GFCI outlet.
Note: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
SS3190091
Purchase Date: /
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@nethealthshops.com, or via our contact us page at
WITH LED LIGHT
XSS-455
Qty.
1
Ensure all parts are
accounted for before
1
disposing of packaging.
1
3
01/2020
/ Order/Customer Reference Number:
NOTE:
The water tubing is built into the fountain. Take care when
handling the water tube; detaching the water tube from the fountain
will damage the fountain and may void the product warranty.
5
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
4
Page 1 / 2