Advertisement
User manual
Programming the ring tones
Switch on programming mode • Press the Function button
Ring tone for Entrance 1 (AS 0) • Press the Unlock door repeatedly until you hear the ring tone
Ring tone for Entrance 2 and
others (AS1-63)
Ring tone for a Landing call
Ring tone for an Internal call
Switch off programming mode • If there has been no activity for 8 sec, the programming mode
Subject to technical changes
René Koch AG
Seestrasse 241
8804 Au/Wädenswil
a short beep
• The red and green LEDs will flash on the monitor
• Press Talk button (1) briefly
• The red and green LEDs will flash on the monitor
• Programming mode switched on
you require
• Press the Talk button repeatedly until you hear the ring tone you
require
• Press the Function button ○ repeatedly until you hear the ring
tone you require
• Press the Function button
tone you require
switches off automatically
• A beep sounds; the red and green LEDs go out
• Programming mode switched off
044 782 6000
044 782 6001 Fax
info@kochag.ch
○
(6) for approx. 8 sec. until you hear
□
repeatedly until you hear the ring
BA TC40/STA e 09.15
Advertisement
