Ime - NATIVE TCT User Manual

EFL Callback
To perform the test
a. Select EFL Callback from the test case list.
b. Press the Hardware Back Button and check whether the back button callback is detected.
c. Press button Delete Callback and the callback will be deleted.
d. Press the Hardware Back Button and check, there is no back button callback is detected.
e. Then press button Add Callback to add a new callback
f. Then again press the Hardware Back Button and check whether the back button callback
is detected.
g. You must press Pass or Fail button to exit from the test.
h. If all the steps are performed correctly then Pass, otherwise Fail.

IME

4.2.2.21
IME Alphabetic
This module shows a custom Alphabetic keyboard layout and its actions.
To Test this Module –
a. Set Default keyboard to TBT keyboard:
b. Go to Settings>Language and input > keyboard and enable TBT keyboard, then Select
Default keyboard as TBT Keyboard.
c. Open IME Alphabetic module from TBT module list
Figure 3-218: Event View
Figure 3-219: EFL Callback
Native TCT User Guide-v1.0