Table of Contents
Advertisement
a. Run DALi Pan Gesture Single.
b. Perform the one finger pan on screen then corresponding signal and data will display.
c. If the corresponding event signals mgs and touch data are changed then press Pass.
Otherwise, press Fail
DALi Pan Gesture Double
To perform the test:
a. Run DALi Pan Gesture Double.
b. Perform the two fingers pan on screen then corresponding signal and data will display
c. If the corresponding event signals mgs and touch data are changed then press Pass.
Otherwise, press Fail
DALi Pan Gesture Angle and Direction
To perform the test:
Figure 3-136: DALi Pan Gesture Single
Figure 3-137: DALi Pan Gesture Double
Native TCT User Guide-v1.0
Advertisement
Table of Contents
