Panasonic DMP-UB404 Operating Instructions Manual page 12

[UB404] Enjoying audio with an amplifier connected to the OPTICAL terminal
Setting
Set the following items in the setup menu (
≥ Set "HDMI(VIDEO) Output Mode" to "Automatic ( Video Only / Video+Audio )". (
≥ Set "HDMI(AUDIO) Output Mode" to "Audio Only". (
≥ To enjoy audio with an amplifier connected to the OPTICAL terminal
Set "Audio Output" to "Off" in "Advanced Settings". (
Connecting an amplifier to a 4K-compatible TV
3D or 4K images can be played back when this unit is connected to a 3D or 4K compatible TV.
≥ This connection only supports up to 5.1ch.
≥ To connect a TV and amplifier with an HDMI cable, connecting terminals on both the TV and amplifier
must be ARC-compatible. (
[UB314]
[UB404]
Setting
Set the following items in the setup menu (
≥ Set "HDMI(VIDEO) Output Mode" to "Automatic ( Video Only / Video+Audio )". (
≥ Set "HDMI(AUDIO) Output Mode" to "Audio Only". (
Getting started
Optical digital cable
29):
11, "About ARC")
HDMI cable
(18 Gbps)
29):
- 12 -
29)
30)
HDMI IN
HDMI IN
(ARC)
HDMI cable
29)
OPTICAL IN
Amplifier/receiver
29)
HDMI OUT
(ARC)
Amplifier/receiver
29)