Table of Contents
Advertisement
fig.2
5. ASSEMBLY
5.1.
REMOVING TRANSIT PACKING
5.1.1.
Place the saw table on a protective covering on the floor.
5.1.2.
Remove the bottom safety cover.
5.1.3.
Unlock the blade tilt using the bevel locking handle (fig.4.10)
5.1.4.
Tilt the blade using the bevel adjustment handwheel (fig.4.8) in an anticlockwise direction.
5.1.5.
Wearing protective gloves, remove the foam transit packing (fig.4.40) from the motor.
5.1.6.
Lock the bevel locking handle (fig.4.10) by turning clockwise.
5.1.7.
Replace the safety cover.
5.2. CONNECTING THE EXTENSION TABLES
5.2.1.
Whilst the saw is inverted, it will be easier to fit the extension tables (figs.5.13 & fig.5.2).
5.2.2.
Offer the extension tables up to the edge of the main table and secure by inserting the captive bolts (fig.5.32) through the edge of the
main saw table and securing with washers (fig.5.29, 5.30).
5.2.3.
Attach hose holder (fig.1.18) to the right extension table (fig.5.2) using washers, bolts and nuts (fig.5.29, 5.30, 5.32, 5.31)
5.2.4.
Turn the saw the correct way up (this is achieved more safely by two persons).
© Jack Sealey Limited
fig.3
Original Language Version
fig.4
TS10P.V2
Issue: 1
12/11/2020
Advertisement
Table of Contents
