Repair And Maintenance; Maintenance And Cleaning - THOMSON HTS300 Manual

Home cinema 5.1
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11

REPAIR AND MAINTENANCE

MAINTENANCE AND CLEANING

• Unplug the appliance before cleaning it.
Problems
The unit does not turn on
The unit does not respond
No sound
The remote control
is not working
Solutions
• Make sure the mains supply cord is properly
connected.
• Make sure there is current at the sector socket
output.
• Make sure the units receives power supply.
• Disconnect and connect the mains supply cord,
then turn the device on again.
• Make sure the system is properly connected.
• Make sure the volume is adjusted at the minimum
level. Adjust as needed.
• Make sure the audio input is set to Reproduction
mode.
• Make sure the remote control is working properly.
• First, select the source using the remote control,
instead of the main unit.
• Reduce the distance between the remote control
and the unit.
• Insert the batteries in correct polarity (+ / -) as
indicated.
• Replace the batteries.
• Point the remote control directly at the sensor on
the front side of the device.
HOME CINEMA 5.1
HTS300
• Remove fingerprints and dust with a soft and slightly damp cloth. Do not use
abrasive products or solvents that may damage the appliance's surface.
ATTENTION: Never immerse the appliance in water or in any liquid whatsoever.
• If it is not used for a long time, unplug the appliance and remove the batteries.
15
EN

Advertisement

Table of Contents
loading

Table of Contents