Panasonic NV-MV20EB Quick Start Manual page 2

You can connect your VCR to a TV and Satellite Receiver using RF cable.
However, using this connection method it may be difficult to obtain a clear picture from the Satellite Receiver.
For this reason it is not recommended for inexperienced users.
(See preferred connection on page 4.)
Satellite Receiver
To AC Mains socket
4
AC Input socket
AC Mains lead
(supplied)
1
Connect the aerial to the aerial input socket of the Satellite
Receiver.
- If you do not have a Satellite Receiver, connect the
aerial to the RF input socket of the VCR and go to step . 3
2
Connect the aerial from the Satellite Receiver to the RF input
IN
socket.
ENT
RF/
ANT
OUT
SORTIE
3
Connect the
IN
ENT
RF/
ANT
OUT
SORTIE
4
Plug the TV, VCR and Satellite Receiver into the mains
as shown at the top of the page.
Notes: Switch ON your Satellite Receiver; to ensure reliable tuning select either SKY ONE or SKY NEWS.
If, after Auto Setup is complete, the programme position of the satellite receiver is not to your
preference, or 'SAT' name is not shown in the Programme List, you can re-arrange the
programme position and enter 'SAT' name manually. See page 34-36 of Operating Instruction.
All manuals and user guides at all-guides.com
Connections (without Scart cable)
Aerial Input socket
Aerial Output socket
RF Input socket
VCR
RF Output socket
RF cable (supplied)
4
Aerial Output socket to the TV aerial socket.
- 2 -
2
RF cable
Aerial Input
socket
3
Must be connected to
watch TV channels.
Satellite Receiver
VCR
1
Aerial
TV
4
To AC Mains socket
Satellite Receiver
VCR
TV