LG 37LG10 Owner's Manual page 84

APPENDIX
10. Color (Command: k i)
To adjust screen color.
You can also adjust color in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1' as shown below.
Acknowledgement
1 1. Tint (Command: k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 0 ~ Green: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1' as shown below.
Acknowledgement
12. Sharpness (Command: k k)
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1' as shown below.
Acknowledgement
13. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off
Acknowledgement
14. Remote Control Lock Mode (Command: k m)
To lock the remote control and the front panel controls on
the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off
Acknowledgement
If you're not using the remote control and front panel
controls on the TV, use this mode. When main power is on/
off, remote control lock is released.
15. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1' as shown.
Acknowledgement
82
[i][ ][Set ID][ ][OK/NG][Data][x]
[ j ][ ][Set ID][ ][OK/NG][Data][x]
[k][ ][Set ID][ ][OK/NG][Data][x]
Data 1: OSD on
[l][ ][Set ID][ ][OK/NG][Data][x]
Data 1: Lock on
[m][ ][Set ID][ ][OK/NG][Data][x]
[r][ ][Set ID][ ][OK/NG][Data][x]
16. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1' as shown below.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
17. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1' as shown below.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
18. Color Temperature (Command: k u)
To adjust color temperature.
You can also adjust color temperature in the PICTURE menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium 1: Cool 2: Warm 3: User
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
19. Red Adjustment (Command: k v)
To adjust red in color temperature.
Transmission
[k][v][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: C8
* Refer to 'Real data mapping 2' as shown below.
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
20. Green Adjustment (Command: k w)
To adjust green in color temperature.
Transmission [k][w][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: C8
* Refer to 'Real data mapping 2' as shown below.
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
*Real data mapping 1
0: Step 0
A: Step 10 (SET ID 10)
F: Step 15 (SET ID 15)
10: Step 16 (SET ID 16)
63: Step 99 (SET ID 99)
64: Step 100
*Real data mapping 2
0: -20
5: -19
A: -18
5F: -1
64: 0
69: +1
C3: +19
C8: +20