Picture Control; Picture Size (Aspect Ratio) Control - LG 37LG10 Owner's Manual

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.
RGB-PC input source use 4:3 or 16:9 aspect ratio.
NOTE
!
If a fixed image is displayed on the
screen for a long time, the image
could become imprinted on the
screen and remain visible.
This phenomenon is common to
all manufacturers and is not
covered by warranty. Although,
after watching video that did not
fill the screen, any afterimage from
the black bars will normally
dissipate after a few minutes.
Set by program
Selects the proper picture proportion to match
the source's image.
(4:3
Set by program
4:3
Choose 4:3 when you want to view a picture with
an original 4:3 aspect ratio.
16:9
Adjust the picture horizontally, in a linear
pro-portion to fill the entire screen.
Zoom 1
Choose Zoom 1 when you want to view the picture
without any alteration. However, the top and bottom
40
portions of the picture will be cropped.
4:3) (16:9
Set by program
4:3
16:9
Set By Program
Press the button and then use
MENU
select the PICTURE menu.
Press the button and then use
Aspect Ratio.
Press the button and then use
the desired picture format.
Press button to return to TV viewing or press
RETURN
button to return to the previous menu.
MENU
16:9)
Zoom 2
Choose Zoom 2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade off between
alteration and screen coverage.
Just Scan
Following selection will lead
picture of best quality without loss of original
picture in high resolution image.
Notes: If there are noise in original picture, you
can see the noise at the edge.
Just Scan operates only in DTV/CADTV
(720p/1080i/1080p), HDMI-DTV,
DVI-DTV input source.
or button to
or button to select
or button to select
Zoom 1
Zoom 2
you to view the
Just Scan