Download
Share
Print this page
ELPRO WI-I/O 9-L-R Quick Start Manual
  1. Manuals
  2. Brands
  3. ELPRO Manuals
  4. Receiver
  5. WI-I/O 9-L-R
  6. Quick start manual

ELPRO WI-I/O 9-L-R Quick Start Manual

Wireless i/o receiver unit
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Quick Start Guide
WI-I/O 9-L-R Wireless I/O
Receiver Unit
WI-I/O 9-L-R QuickStart v1.7

Advertisement

loading

Related Manuals for ELPRO WI-I/O 9-L-R

Summary of Contents for ELPRO WI-I/O 9-L-R

  • Page 1 Quick Start Guide WI-I/O 9-L-R Wireless I/O Receiver Unit WI-I/O 9-L-R QuickStart v1.7...
  • Page 2 ELPRO 905U-L Wireless I/O Receiver Unit Quick Start Guide This document is the WI-I/O 9-L-R Wireless I/O Receiver Unit Quick Start Guide and contains the following sections: Section Read this section if you want to … Basic steps for using your unit Learn the basic steps for installing and using your unit.

  • Page 3: Analog Output

    ELPRO 905U-L Wireless I/O Receiver Unit Quick Start Guide Your WI-I/O 9-L-R receiver unit has the following components and terminal connections: Earth Wire Lug underneath Unit + 24V Max. 30VDC 500mA DO 1 For inductive load, use surge diodes DO 2...
  • Page 4 ELPRO 905U-L Wireless I/O Receiver Unit Quick Start Guide front panel contains the following components: SMA antenna connector at top of unit RS232 configuration port RSSI push-button The LEDs on the front panel indicate the unit status: LED Status Indicates None No power supply.
  • Page 5 ELPRO 905U-L Wireless I/O Receiver Unit Quick Start Guide ELPRO 905U-L Wireless I/O Receiver Unit v1.7 page 5 of 8...
  • Page 6 2. Power on the WI-I/O 9-L-R receiver. 3. The WI-I/O 9-L-R receiver flashes all LEDs at medium flash (i.e. 1.6 Hz). NOTE: If the LEDs do not flash, you must repeat steps 1 and 2 until the LEDs flash before continuing.
  • Page 7 Exposure to RF energy is an important safety consideration. The FCC has adopted a safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated equipment as a result of its actions in Docket 93-62 and OET Bulletin 65 Edition 97-01. FCC Notice when used in USA: WI-I/O 9-L-R Module Part Additional information This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC rules (Code of Federal Regulations 47CFR Part 15).

  • Page 8: Document Information

    ELPRO 905U-L Wireless I/O Receiver Unit Quick Start Guide Document information Quick Start Guide WI-I/O 9-L-R Wireless I/O Receiver Unit Weidmuller, Inc. contact details Address > 821 Southlake Blvd., Richmond, VA 23236 Telephone > (800) 849-9343 Fax > (804) 897-4135 Email >...