Dannmar DMR-6 Installation And Operation Manual

Portable mid-rise scissor lift

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Installation and Operation Manual

Manual P/N 5900253 — Manual Revision A — August 2020

Model:

• DMR-6

⚠

DANGER

Portable Mid-Rise Scissor Lift

Read the

product. Failure to follow the instructions and safety precautions in

this manual can result in serious injury or death. Make sure all other

operators also read this manual. Keep the manual near the product

for future reference. By proceeding with setup and operation,

you agree that you fully understand the contents of this

manual and assume full responsibility for product use .

entire

contents of this manual

1645 Lemonwood Dr.

Santa Paula, CA, 93060 USA

Telephone: (877) 432-6627

Dannmar.com

before

using this

Table of Contents

Need help?

Do you have a question about the DMR-6 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dannmar DMR-6

Page 1 Santa Paula, CA, 93060 USA Telephone: (877) 432-6627 Dannmar.com Portable Mid-Rise Scissor Lift Installation and Operation Manual Manual P/N 5900253 — Manual Revision A — August 2020 Model: • DMR-6 ⚠ entire before Read the contents of this manual using this product.
Page 2 BendPak is not responsible for typographical errors in this manual. Warranty. The Dannmar warranty is more than a commitment to you: it is also a commitment to the value of your new product. Contact your nearest BendPak dealer or visit the Dannmar website.
Page 3: Table Of Contents
ALI Store Introduction This manual describes the Dannmar DMR-6, which is a Mid-Rise Scissor Lift that is portable and comes with a small footprint designed for narrower bays and low-ceiling garages. The DMR-6 can raise Vehicles up to 6,000 lbs (2,722 kg).
Page 4: Shipping Information
Instead, take it out of service, then contact your dealer. • Make a thorough inspection at least once a year. Replace any damaged or severely worn parts, decals, or warning labels. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 5 Modifications to the equipment without prior, written permission from BendPak Inc. • Injury or death caused by modifying, disabling, overriding, or removing safety features. • Damage to the equipment from external influences. • Incorrect operation of the equipment. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 6: Components
Short Hydraulic Hose. Connects the two Hydraulic Cylinders on the Lift. • Safety Locks. Hold the Platform in place, once they are engaged. The DMR-6 has three Safety Lock positions, which lets you select the right Vehicle height for your needs.
Page 7: Specifications
For height comparison only; *** Lowering is much slower with no Vehicle on the Lift. **** Must specify at time of ordering. Specifications subject to change without notice. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 8: Installation Checklist
Installation Checklist Following are the steps needed to install a DMR-6 Lift. Perform them in the order shown. ☐ 1. Review the installation Safety Rules. ☐ 2. Make sure you have the necessary Tools. ☐ 3. Select the Installation Site.
Page 9: Installation
Installation This section describes how to install a DMR-6. Perform the steps in the order listed. ⚠ Use only the factory-supplied parts that came with your Lift WARNING . If you use parts from a different source, you void your warranty and compromise the safety of everyone who installs or uses the Lift.
Page 10 Select a Site The DMR-6 is portable, so you may be moving it and using it at a variety of locations. Keep the following in mind when selecting a location for your Lift: • Clearance. You must have adequate space on all sides, plus enough space above for the Vehicles you will be raising.
Page 11 The Frame is heavy; if handled incorrectly, it can damage materials like tile, sandstone, and brick. Try to handle the Lift components twice: once when delivered and once when moved to the installation location. Use care when moving the Frame. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 12 HHB M6 x 1.0 x 35 5535357 Nut M6 x 1.0 NL 5545202 Washer M8 x Ø 15 SL 5530304 HHB M8 x 1.25 x 20 5535001 Nut M8 x 1.25 NL DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 13 The Tow Cart lets you move the Lift around your work space. Keep the Tow Cart in an accessible area for future use. The following drawing shows how to set up the Tow Cart. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 14 Avoid mixing different types of Hydraulic Fluid. If Hydraulic Fluid needs to be replaced, make sure to flush the Hydraulic System of the old Hydraulic Fluid before you add the replacement fluid; do not mix the two together. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 15 If you put too much, the excess liquid will be pushed out when the Fitting is tightened; use a rag to wipe the excess. 3. Tighten the Fitting into the connector; do over tighten the Fitting. 4. Allow the manufacturer-recommended curing time before pressurizing the system. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 16 6. Connect the Female Quick-Connect Fitting to the other end of the Hydraulic Hose. 7. On the Power Unit, remove the Shipping Plug from the Hydraulic Out Port you want to use; it does not matter which one you use. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 17 8. Attach the ORB end of the Male Quick-Connect Fitting to the Power Unit, then connect the other end of the Male Quick-Connect Fitting to the Female Quick-Connect Fitting. Once all Hoses and Fittings have been attached, securely tighten all connections. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 18 To switch them, remove the Lock Screw on the end of the Lift Arm, remove the current Pad, slide on the desired Pad, and then replace the Lock Screw. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 19 Remember, all wiring must performed by a appropriate for your location. licensed, certified Electrician for this process. 2. Plug the Power Cord to an appropriate power outlet. 3. Begin using the Lift. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 20 Tellus S4 / S3 / S2, or any synthetic multi-vehicle automatic transmission fluid. ⚠ WARNING Do not run the Power Unit without Hydraulic Fluid; you will damage it. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 21 Make sure that all Safety Locks are cleared and free. • Leave the Manual with the Owner/Operator so that it is available for anyone who needs to read it. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 22: Operation
Check the Lift. Walk all the way around the Lift, checking for any missing, heavily worn, or damaged parts. Do not operate the Lift if you find any issues; instead, take it out of service, then contact your dealer, or email support@dannmar.com , or call (877) 432-6627 . •...
Page 23 3. Press and hold the Lowering Handle for a few seconds; the Release Cam moves into a locked position on the Lock Block it just passed. If you miss the desired Safety Lock, there’s no problem; just try it again until you get it right. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 24 Vehicle, damage the Lift, or injure or kill anyone under the Vehicle. 13. On the Power Unit, press and hold the Up button. 14. When the Lift just passes the desired height, release the Up button. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 25 5. Push the Lift Arms in towards the Frame. This is so they are not in the way when the Vehicle is moved. 6. Carefully drive the Vehicle off the Lift. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 26 3. Using a downward force, push the Tow Cart to raise the Lift onto its rear wheels, and then carefully move the Lift to the desired location. Lubricate the Lift The following drawing shows the lubrication points on the Lift. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 27: Maintenance
Monthly: Check the Power Unit’s Hydraulic Fluid levels. Refill if low. ⚠ WARNING: Do not operate your Lift if you find issues; instead, take it out of service, then contact your dealer, email support@dannmar.com, visit dannmar.com/support, or call (877) 432-6627. Troubleshooting This section describes how to troubleshoot your Lift.
Page 28: Wiring Diagrams
Power Unit, Only leave the Lift either fully lowered or lowering the Lift). engaged on a Safety Lock. If you continue to have problems with your Lift, contact your dealer, visit dannmar.com/support, email support@dannmar.com, or call (877) 432-6627. Wiring Diagrams 5585435 DMR-6 Mid-Rise Scissor Lift P/N 5900253 —...
Page 29: Labels
Labels DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 30 DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 31: Parts Diagrams
Parts Diagrams DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 32 DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 33 DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 34 DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...
Page 35: Ali Store
The ALI Store is your trusted source for workplace safety! Visit today and get the training and materials you need to work safely: www.autolift.org/ali-store/. DMR-6 Mid-Rise Scissor Lift P/N 5900253 — Rev. A — August 2020...

Dannmar DMR-6 Installation And Operation Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Dannmar DMR-6

Summary of Contents for Dannmar DMR-6

Table of Contents