Oil Change Intervals And Specifications - JLG GRADALL 522D Owner's/Operator's Manual

Se c t ion 6
Spe c ific a t ions
PRA 352 Series Planetary Drive Axle

Oil Change Intervals and Specifications

Off-Highway
Operation Intervals
Initial Check
Oil Oil
Change Level
100 250
operating operating
hours hours
or year (which-
1240-3100 ever comes
miles
(2000-5000
km)
(whichever
comes first)
NOTES:
The checking interval depends on the individual operating conditions, speeds and loads. Severe operating conditions may require more
frequent intervals.
Tractor oil universal fluid, 'TOU' types formulated for wet disc brakes, is recommended for use in the wet disc brake housing. Make sure
that the specifications of the tractor fluid are the same as the recommended specifications of the vehicle manufacturer.
!
CAUTION
•
The operating temperature of the coolant must
never reach or exceed 250°F (120°C). If the
operating temperature of the coolant reaches
or exceeds 250°F (120°C), the internal
components of the brake will be damaged. A
forced cooling system may be required to
assure the coolant temperature remains below
250°F (120°C).
•
Use only the brake hydraulic fluid specified by
the manufacturer of the vehicle. Do not use
different hydraulic fluids. The wrong fluid will
damage the seals on the piston.
52
Petroleum Synthetic
Oil Oil
Change Change Specification
1,500 —
operating
hours
or twice a
first)
Meritor Military
Specification
0-84 —
Oil
Description
Petroleum Base
SAE 10W, 20W
or 10W/30
Courtesy of Crane.Market