Hitachi R-WB480PRU2-1 Instruction Manual page 7

Other Functions (Continuation)
"Quick Cooling"
When you want to cool food or drinks quickly, use this function.
1. Put food on the quick cooling corner.
"Quick Cooling" corner is located
on the upper part of the refrigerator
compartment.
"Quick Cooling" is more effective if food is placed
near the back wall of the refrigerator compartment.
Notice
During defrost period, "Quick Cooling" operation will stop even when the lamp is on.
After finishing its period, the operation will restart automatically.
Please note "Quick Cooling" mode will be released after power cut off or unplug.
Door Alarm and ECO Alarm Functions
If the door is left open for more than 1 minute, the alarm system will inform the user by the sound and digital display (LED).
Door Alarm: Informs by
Eco Alarm Display: Indicates the door opening state on the control panel.
Duration of Door Opening
After 1 minute
After 2 minutes
After 3 minutes
Notice
If the refrigerator door opens,
All alarm functions (Door Alarm and Eco Alarm Display) and each button operation sound can be disactivated.
To Disactivate Alarm and Sound
1. Keep pressing "Quick Freezing"
button for approximately
5 seconds until the sound of
"Pipi!" is heared.
Pi!
Freezing
1,2,3,4,5 Seconds
Peep!
Notice
Upon shipment, the alarm and sound are set "ON".
If the Door Alarm, Eco Alarm Display and each button operation sound have been deactivated, the refrigerator will still set the
alarm and sound to "OFF" even though a power failure or when unplugging and reconnect the power plug.
2. Touch "Quick Cooling" button
to start Operation.
Peeppeeppeep
sound.
Door Alarm Sound ECO Alarm Display
Peeppeeppeep
Displays OP R.
Peeppeeppeeppeeppeep
Displays OP R.
Peeps continuously. Displays OP R.
OPR is displayed
Lamp light is on.
Lamp light is off.
Pi!
Lamp light is on.
To re-activate Alarm and Sound
1. Keep pressing "Quick Freezing"
button for approximately
5 seconds until the sound of
"Pipi!" is heared.
Freezing
1,2,3,4,5 Seconds
Pipi!
3. To stop this function before it
is completed, press "Quick
Cooling" button again.
Pipi!
Lamp light is off.
"Quick Cooling" will be finished
automatically in approximately
90 minutes.
Pipipipi!
Lamp light is off.
Peeppeeppeep!
Lamp light is on.
. . . .
Lamp light is off.
7