Panasonic TX-65EZ1000E Operating Instructions Manual page 17

Common Interface
Turn the TV off with Mains Power On / Off switch
whenever inserting or removing the CI module.
If a smart card and a CI module come as a set, first
insert the CI module, then insert the smart card into
the CI module.
Insert or remove the CI module completely in the
correct direction as shown.
Normally encrypted channels will appear. (Viewable
channels and their features depend on the CI
module.)
If encrypted channels do not appear
[Common Interface] in the Setup Menu
There might be some CI modules in the market
with older firmware versions that do not work fully
interoperable with this new CI+ v1.3 TV. In this case,
please contact your content provider.
For details, refer to [eHELP] (Search by Purpose >
Functions > Common Interface), read the manual of
the CI module, or check with the content provider.
TV
USB HDD (for recording)
Use USB 1 port for connecting the USB HDD.
For details, refer to [eHELP] (Search by Purpose >
Recording).
VIERA Link
Use HDMI1 - 4 for VIERA Link connection.
For details, refer to [eHELP] (Search by Purpose >
Functions > VIERA Link "HDAVI Control™").
CI module
Cable arrangement
Before fixing the cables, remove the cover and cable
cover (rear).
Fix the cables using the cable clamp and cable tie, and
then attach the terminal cover to the TV.
Fixing the cables using the cable tie and
cable guide
Cable guide
Cable tie
Cable guide
Open
Close
Attach the cable tie
Insert the cable tie in a hole
Hole
17
English