Download
Share
Print this page
bioscrypt Veri Series Setup Manual
  1. Manuals
  2. Brands
  3. bioscrypt Manuals
  4. Rfid Systems
  5. Veri Series
  6. Setup manual

bioscrypt Veri Series Setup Manual

Hide thumbs Also See for Veri Series:

Advertisement

Quick Links

Download this manual
Appendix A – Notices
The Veri-Series product line has been tested for compliance with all applicable
international standards.
additionally printed on the labeling located on the rear panel of the product.
The power supply offered by Bioscrypt is CE and CSA approved and UL listed.
V-Flex
V-Prox
V-Pass
V-Smart
V-Station
FCC Information to Users
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
FCC Class B Digital Device or Peripheral - User's Notice (for all V-Station models only)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of more of the following measures:
• Reorient or relocate the receiving antenna
Document #430-90003-16
The resulting approvals are listed below, and are
FCC, UL 294, CSA, CE
FCC, UL 294, CSA, CE
FCC, UL 294, CSA, CE
FCC, UL 294, CSA, CE
FCC, UL 294, CSA, CE
© Copyright 2005 Bioscrypt Inc. All Rights Reserved.
Page 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Veri Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for bioscrypt Veri Series

Summary of Contents for bioscrypt Veri Series

  • Page 1: Appendix A - Notices

    The resulting approvals are listed below, and are additionally printed on the labeling located on the rear panel of the product. The power supply offered by Bioscrypt is CE and CSA approved and UL listed. V-Flex FCC, UL 294, CSA, CE...
  • Page 2 The V-Prox and V-Smart are compliant with this directive if, and only if, the user installs the Bioscrypt specified R&TTE Installation Kit (Bioscrypt part number 832- 00103-00). This filter kit should be included with any V-Prox or V-Smart product if it was shipped to a country within the EU.
  • Page 3 If the filters were not included with the product or if they are desired separately, they may be ordered from Bioscrypt (part number 832-00103-00) or the distributor from which the product was purchased. Please see Appendix C for details on proper installation of these filters.
  • Page 4 If you intend to move this device within the EU, please contact your distributor first in order to check if this device is approved for use in that particular country. Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.

  • Page 5: Appendix B - European Certification Documentation

    Directive 1999/5/EC. Restrictions of Use Bioscrypt has notified the following EU countries and gained approval to sell the - Prox, V-Smart/MIFARE, and V-Smart/iCLASS products: • Belgium • France •...
  • Page 6 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to uni Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 November 25, 2002 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 7 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 November 25, 2002 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 8 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 November 25, 2002 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 9 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 November 25, 2002 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 10 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 November 25, 2002 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 11 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 November 25, 2002 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 12 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 November 25, 2002 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 13 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 November 25, 2002 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 14 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 November 25, 2002 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 15 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 January 6, 2003 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 16 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 January 6, 2003 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 17 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 January 6, 2003 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 18 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 January 6, 2003 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 19 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 January 6, 2003 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 20 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 January 6, 2003 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 21 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 January 6, 2003 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 22 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 January 6, 2003 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 23 I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units. Manufacturer Legal Representative in Europe Shiraz Kapadia Neil McDonald Vice President, Operations Director of Sales, EMEA Markham, ON, Canada High Wycombe, England September 9, 2003 January 6, 2003 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.

  • Page 24: Appendix C - Installing The R&Tte Installation Kit Filters

    Installation Kit filters, which are required in certain European countries for full CE compliance. These kits are required only for the V-Prox and V-Smart products and are not required for any other Bioscrypt product. More information can be found regarding the CE R&TTE directive online at the European Union web site: http://www.europa.eu.int/comm/enterprise/rtte/index.htm...
  • Page 25 The cable assembly (and connected filter) is now rotated 90 degrees to allow passage through the aperture of the wall plate. The V-Smart device should next be connected to the cable assembly, and then pushed back Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 26 The device may now be rotated back 90 degrees to the upright position and lowered onto the mounting hooks of the wall plate. Please see figure 17 for wiring details. Figure 17: V-Smart R&TTE Installation Kit Wiring Diagram Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 27 (4) National Semiconductor provides a number of Application Notes: http://www.national.com/an/AN/ (5) Belden Wire and Cable Company offers a variety of cables suitable for RS- 485 use and has a number of technical papers: http://www.belden.com Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 28 (7) Cisco Systems, Inc., provides a comprehensive guide to Ethernet 802.x standards and implementation issues: http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/ethernet.htm (8) Charles Spurgeon provides an excellent online Ethernet resource: http://www.ethermanage.com/ethernet/ethernet.html (9) The CE R&TTE directive is outlined on the EU website at: http://www.europa.eu.int/comm/enterprise/rtte/index.htm Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 29 Van Nuys, CA 91411 High Wycombe, Buckinghamshire 905 940 7750 818 304 7150 England HP15 7TZ 905 940 7642 818 461-0843 +44 (0) 1494 814 404 www.bioscrypt.com +44 (0) 1494 815 513 Document #430-90003-16 © Copyright 2005 Bioscrypt Inc. All Rights Reserved.
  • Page 30 C:\Program Files\Bioscrypt\VeriAdmin\Docs or another location that you defined during the installation procedure. The documentation is provided in Adobe® Acrobat® format (PDF). The Adobe Acrobat reader is available on the CD or on- line at www.adobe.com. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...

  • Page 31: Other Required Equipment

    2000, or XP 486-compatible 16 MB RAM 30 MB disk space Door controller Networking cable RS-232/RS-485 Converter P/S for converter CD with VeriAdmin User Documentation software and documentation (included on VeriAdmin CD) © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 32 Support using the contact information located in the Warranty and Returns section of this document. Please see the Release Announcement document on the CD-ROM for the latest updates to this and other documentation. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 33 Aux. Port Internally, your fingerprint reader is powered by hardware and software developed by Bioscrypt. The “bioscrypt on board™” logo signifies that Bioscrypt's biometric technology has been integrated into this product. It provides the assurance that Bioscrypt's high standards of biometric quality and security reside within the product.
  • Page 34 Green – Pass Red – Fail Conductive Plastic Mask Fingerprint Sensor RidgeLock™ to aid in consistent finger placement Power Indicator ® MIFARE iCLASS™ smart card reader ABS Plastic Body Aux. Port © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 35 Red – Fail Fingerprint Sensor LCD Backlit RidgeLock™ Display Power Indicator Illuminated Keypad Some models: ® MIFARE iCLASS™ smart card reader or HID Proximity reader Aux. Port ABS Plastic Body © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 36 (the system is optimized for user populations up to 100, but can be used for populations up to 200). The V-Pass provides fingerprint only identification – no cards or PINs are required to use the © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 37 Also, this is the first product to offer Ethernet support. It is probably the most versatile product in the Veri-Series. ® MIFARE is a registered trademark of Philips Semiconductors iCLASS™ is a trademark of HID Corporation © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 38 RS-485 communication is typically used for template distribution to multiple units. Wiegand output is typically used to send the user information (ID number and facility code from card) to an access control panel, but this connection is not strictly required. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...

  • Page 39: Preparing Wiring

    Power – should be 18 – 22 AWG (10 – 7 MWG) wire, 2 conductors. Earth Ground – use a single wire with heaviest gauge reasonable. Warning: Do not use Power Ground as a substitute for Earth Ground. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 40 Power GND Black Black Signal GND Green w/ White Black/Red Power input (9-24 VDC) Blue w/ White *(9-12 VDC) for V-Smart Reserved Blue Red/White Earth ground White w/ Black Green/Yellow © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...

  • Page 41: Signal Description

    TTL Data 1 Out TTL Ground 4. [RS-485 network only]: Use a daisy chain network design as depicted in the following figure. Do not use a star or other multi-drop configuration. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 42 Connect to Earth Ground 6. [RS-485 network only]: RS-485 supports distances up to 4,000 feet (1,200 meters) and/or 31 readers. To extend these limitations, contact Bioscrypt Technical Support. Typically no end-of-line termination is required unless the total run exceeds 2,000 feet.
  • Page 43 (i.e., the Internet). *Ethernet communication is supported in firmware versions 7.10 and higher. VeriAdmin 5.10 or higher is required for administration over Ethernet. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 44 Connect RJ11 to reader and DB9 to PC COM port. b. Plug pigtail cable into reader (if not a V-Station) and connect power to appropriate conductors identified in the charts on pages 11 and © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 45 Network Setup dialog. This dialog is also reached by clicking on this icon: . Select the serial (COM) port(s) you intend to use or Ethernet and click OK. It is recommended that you check “Auto”. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 46 First click on the Comm port or Ethernet within the network tree which you have connected the unit to (the icon). Then click on the “Add Unit” button (lower left). © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 47 RESPONDING, check the connections and then press the Refresh button to try again. e. You may assign the unit a name (default is “New Bioscrypt Unit”) if desired. f. The network tree shown on the left will show a small icon...
  • Page 48 Wiegand Tab: Wiegand parameters NOTE: We do not recommend changing the Aux. port Baud rate at this time. 4. Repeat steps 2-4 (skipping 3a) for the next reader until all readers are configured. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 49 (to further minimize the risk of compromised or lost cards), then this can be done through an RS-485 network or by making the appropriate changes to the reader through the Aux port. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 50 DHCP*. Caution should be exercised when manually assigning IP addresses: it should be appropriate for the given network and should not conflict with other devices or PCs on the network. Bioscrypt recommends isolating all V-Stations on a closed Ethernet network, both for security reasons and to avoid conflicts with other computers and devices on the network.
  • Page 51 For V-Smart, the access hole in the wall for wiring should be less than 4 ½ inches wide so that wall plate will cover it. It should be © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 52 Use 4 outer mounting points (6 for V-Station). ii. Up to #6 screws can be accepted (screws and drywall anchors are provided). c. Use template provided to mark holes. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 53 3) with tab in the reader body groove, rotate the cover clockwise until the right tab snaps into place at the right rear corner Step 1 Step 2 Step 3 © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 54 The following pages show the dimensions of the wall mounting plates for the smaller Veri-Series readers (V-Prox, V-Flex, V-Pass), the V-Smart, and the V- Station. The diagrams are not to scale however full-scale drawings can be found in the Veri-Series Installation Guide. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 55 Veri-Series Setup Guide ” ¾ 0 mm ” 5/32” ø 1” ” 7 mm Mounting Template for V-Prox / V-Flex / V-Pass (not to scale) © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 56 Veri-Series Setup Guide Mounting Template for V-Smart (MIFARE and iCLASS) (not to scale) © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 57 Veri-Series Setup Guide Mounting template for V-Station (all models) (not to scale) © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...

  • Page 58: Basic Operation

    Content measures how unique 3 stars for quality and 2 stars for (i.e., curvy) the captured pattern content. If enrollment scores for Content Quality acceptable, then click on Accept. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 59 Template Manager functions. In the case of V-Smart, the template is stored on the smart card and does not need to be distributed. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 60 Veri-Series Setup Guide 2. Using the keypad to enroll a new fingerprint (V-Station only): a. From the idle screen (showing ”Bioscrypt” with the date and time), press 0-0-0 (three zeroes) and . You will be warned about no admin ID.
  • Page 61 Oily deposits from your finger accumulate on the surface of the fingerprint sensor after repeated use. These deposits can degrade the © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 62 To clean the sensor, use a clean, soft cloth dipped in isopropyl (rubbing) alcohol. Use a sweeping motion to remove deposits from the sensor. Do not use a soiled cloth or any abrasive brushes, pads or detergents. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 63 It is always our goal at Bioscrypt, Inc. to supply accurate and reliable documentation. If you discover a discrepancy in this document, please e-mail your comments to support@bioscrypt.com, or contact Bioscrypt Technical Support at the telephone number listed below.
  • Page 64 (evident or concealed) with the freight carrier. Bioscrypt must be notified within thirty days of shipment of incorrect materials. If a defect is discovered, Bioscrypt's sole obligation shall be to repair or replace the Bioscrypt product(s) at its sole discretion at no charge, provided it is returned to Bioscrypt during the warranty period and is shipped freight and insurance prepaid.
  • Page 65 • Damage caused by the equipment or system with which the biometric reader is used • Damage caused by modification or repairs not made or authorized by Bioscrypt • Damage caused by improper packaging • Damage caused by lack of ESD protection •...
  • Page 66 Bioscrypt specifically disclaims any and all implied warranties, including without limitation, warranties of merchantability and fitness for any particular purpose. No Bioscrypt dealer, agent, or employee is authorized to make any modification, extension or addition to this warranty.
  • Page 67 Veri-Series Setup Guide Bioscrypt Return Policy and Procedures Bioscrypt must be notified within thirty days of the date that a defect is discovered. Bioscrypt will then issue a Return Material Authorization (RMA) number which the Customer must include with all correspondence and display on the outside of the shipping container when returning the product.
  • Page 68 Veri-Series Setup Guide Carefully read the following regarding billable repairs: By shipping product to Bioscrypt using the RMA provided by the Technical Support Department, you are agreeing to the following terms: For all non-warranty repairs or billable repairs, the customer will be responsible for charges associated with parts, labor and shipping/freight to and from the Bioscrypt repair facility.
  • Page 69 Bioscrypt will have the final decision as to whether an item can be returned or exchanged. If you did not purchase your product directly from Bioscrypt Inc, please contact your retailer for their return policy. © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 70 The resulting approvals are listed below, and are additionally printed on the labeling located on the rear panel of the product. The power supply offered by Bioscrypt is CE and CSA approved and UL listed. V-Flex FCC, UL 294, CSA, CE...
  • Page 71 818.304.7180 Fax: 818.304.7187 Email: support@bioscrypt.com Web: http://www.bioscrypt.com Hours: 5:30A – 5:00P PST (Monday – Friday) Address Bioscrypt Inc. Technical Support Department 5805 Sepulveda Blvd., Suite 750 Van Nuys, CA 91411 © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...
  • Page 72 Van Nuys, CA 91411 High Wycombe, Buckinghamshire 905 940 7750 818 304 7150 England HP15 7TZ 905 940 7642 818 461-0843 +44 (0) 1494 814 404 www.bioscrypt.com +44 (0) 1494 815 513 © Copyright 2005 Bioscrypt Inc. All rights reserved. Document #430-00111-18...

This manual is also suitable for:

V-flexV-proxV-passV-smartV-station