MJ LED LIGHTNING MJ-2037C User Manual

Led outdoor par-718

Table of Contents

Download this manual

WARNING

Please do not use the lamp under the water!

Please do not connect the power cable hand by hand

over 10 lights per time!

Important notice:



Before open the LED outdoor par light and if you want to do the

repair work, please make sure the power source is at the separation

condition.



Unceasingly carries on the product improvement about our

company the policy, in this instruction booklet carries the data will

have the possibility to be able to change in the future, when no

longer separate notice change matters concerned. Our company

retains when the product improvement changes the related

specification the authority. This instruction booklet publisher cannot

be responsible regarding this instruction booklet in information

accuracy, also cannot the related consequence which causes

regarding these information be responsible.

LED OUTDOOR PAR-718

MJ-2037C

User Manual

PROFESSIONAL LED LIGHTING

=======

Thank you for choosing our outdoor LED Par light. For the sake of your safety,

Please read and follow these instructions carefully and keep this manual in a safe

place for future reference

========

Table of Contents

Do you have a question about the MJ-2037C and is the answer not in the manual?

Page 1 LED OUTDOOR PAR-718 WARNING MJ-2037C Please do not use the lamp under the water! Please do not connect the power cable hand by hand over 10 lights per time! Important notice:  Before open the LED outdoor par light and if you want to do the repair work, please make sure the power source is at the separation condition.
Page 2 5. Channel List: 6CH Mode Function Channel Value Red dimming from dark to bright 0-255 Green dimming from dark to bright 0-255 Blue dimming from dark to bright 0-255 White dimming from dark to bright 0-255 Amber dimming from dark to bright 0-255 Purple dimming from dark to bright 0-255...
Page 3 3. Technical Parameters: 1. Installation: Construction: Aluminum 1.This light work normally between Voltage Voltage: AC 100-240V, 50Hz/60Hz AC100~240V,50/60Hz. LED: 7PCS 18W 6IN1 LED 2. In order to secure the safe installation of the light, always use it in the Power Consumption: 126 Watts well-ventilated environment.
Page 4 DMX Control No. Display Function If you wish to control the unit remotely via DMX, you will need a DMX controller. Connect an XLR cable to the controller's DMX Channel choose (6CH/11CH) Press “UP” and “Down” 6CH/11CH/ output and the fixture's input. button change the DMX Channel d001—d512 (DMX address setting) press “UP”...