Table of Contents
Advertisement
Plug your oven into a standard household socket.
Make sure your oven is the only appliance
connected to the socket. If your oven does not operate
properly, unplug it from the electrical socket and then plug it
back in.
Fill a microwave safe container with
300 ml (1/2 pint) of water. Place on
the GLASS TRAY and close the oven door. If you
have any doubts about what type of container to
use please refer to page 27.
Open your oven door by pushing the Door Open
button. Place the ROLLER REST inside the oven and
place the GLASS TRAY on top.
Press the
START button
once to set
30
30 seconds of
Seconds
cooking time.
You will hear
a BEEP when
you press the button.
5
The DISPLAY will count down from 30 seconds.
When it reaches 0 it will sound BEEPS. Open
the oven door and test the temperature of the water. If
your oven is operating the water should be warm. Be
careful when removing the container it may be hot.
YOUR OVEN IS NOW INSTALLED
Advertisement
Table of Contents
