Related Manuals for Etesia AK60
Summary of Contents for Etesia AK60
- Page 1 Original user Please read carefully before using your machine manual AK60 - AH75...
-
Page 2: Table Of Contents
CONTENTS 1• Your safety and that of others ................................3 2• Key to diagrams ..................................... 5 3• Description ......................................7 4• Pictures ........................................8 5• Technical specifications ..................................13 6• Preparation and getting started ................................14 7• Operating instructions ..................................15 8•... -
Page 3: 1• Your Safety And That Of Others
10 years, as from the date of the invoice issued by our company. You are now the proud owner of an Etesia brush-cutter! This extre- mely reliable and tough machine has been specially designed to give INTRODUCTION many years of service. - Page 4 ETESIA. • Only buy the amount of fuel you need for on month’s use and keep • Any modification not authorized by ETESIA could render the it in a clean jerrican set aside for this purpose.
-
Page 5: 2• Key To Diagrams
2• KEY TO DIAGRAMS - SAFETY e. Gasoline is extremely flammable and explosive and can cause fires This symbol appears in the instruction manual alongside and severe burns. Do not fill the fuel tank when the motor is running those sections which deal with user safety. or hot. - Page 6 2• KEY TO DIAGRAMS - USE E - SPEED CONTROL LEVER • Forward speed 3 • Forward speed 2 • Forward speed 1 F - BLADE CLUTCH CONTROL Start 1 - Push the red safety button to the right and hold it. 2 - Apply the blade clutch control lever to the handlebar, then release the safety button.
-
Page 7: 3• Description
SPARE PARTS 8. Speed selector lever 9. Blade clutch lever Kit of 2 flails: MC85 10. Blade clutch safety button Blade body: 50673 (AK60), 50533 (AH75) 11. Gas lever Fuel preservation: 09800 12. Cutting height adjustment control Anti-punchure tyre liquid: 28461... -
Page 8: 4• Pictures
4• PICTURES 20° > AK60 < AK60... - Page 9 4• PICTURES AH75 AK60 > < AH75...
- Page 10 4• PICTURES MC85 20602 05496 37669 53792 AK60 : 50673 AH75 : 50533 71201 53839 37665 71242...
- Page 11 4• PICTURES AK60 AH75 AK60 AH75 AK60 0,70 - 0,80 mm...
- Page 12 4• PICTURES 13 ≤ x ≤ 32 (mm) AH75 AK60...
-
Page 13: 5• Technical Specifications
3300 min -1 3300 min -1 Rated speed 3225 m²/h 2580 m²/h Performance Recoil Starter SAE 30, 10W30 or the oil recommended by Etesia (ref. 38383) Engine oil 1,1 l 0,65 l Oil tank capacity Unleaded fuel Fuel 2,1 l... -
Page 14: 6• Preparation And Getting Started
• Unscrew the cap and take out the dipstick (a pictures 5 and 6). Never leave the engine running in closed areas where carbon • Slowly pour oil. The oil capacity is 0,65 l for the AK60 model and monoxide, a dangerous substance, could build up. -
Page 15: 7• Operating Instructions
7• OPERATING INSTRUCTIONS CUTTING HEIGHT ADJUSTMENT Select a superior position (position 2 or 3) for a high speed if the conditions of use allow it: dry grass, neither too high nor too dense, flat ground or displacement of the brush-cutter with the blade stopped. -
Page 16: 8• Maintenance
• Remove the dipstick once more to check the oil level : the mark left A damaged blade could be particularly dangerous if a piece comes on the gauge must reach the FULL mark for the AK60 model and away and is ejected by the cutting system. - Page 17 8• MAINTENANCE • Do not fill the oil sump past the [FULL] (AK60) or the upper Do not hesitate to change a worn spark plug when necessary. (AH75) mark on the dipstick. • Screw the plug of the filler neck up tightly before starting the Use only ETESIA original spark plugs (03861).
- Page 18 - Block the idle wheels (picture 15). - Transporting your mower using straps (picture 29). An oil change (b picture 27) must be carried out by your ETESIA dealer after 50 hours of operation, then every 200 hours. The brush-cutter must be kept horizontal to avoid oil or petrol overflow.
-
Page 19: 9• Long Stop - Winter Storage
• Engine hot, empty the oil frame. Fill with new oil until you reach - Unscrew the spark and clean it with fuel. Allow to dry without the FULL mark for the AK60 model and the upper limit of the replacing it. -
Page 20: 10• Regular Maintenance Summary
Replace the car- tion tridge Spark Clean - adjust the Replace Replace if used too electrodes much AK60 - AH75 Element Before each cutting After the 50 first hours Every Periodically Observation 200 hours Cooling system Cleaning around the muffler... -
Page 21: 11• Standard Repairs - Problems And Remedies
In addition to risks incurred by the user, the use of parts other than the manufacturer’s will result in the cancellation of the warranty for any damage caused. ETESIA refuse to accept responsibility for accidents due to the use of parts not coming from the manufacturer. -
Page 22: 12• Warranty
ETESIA. Should ETESIA (main or secondary residence). not receive these part(s), a warranty claim would automatically be - Professional use = use of an ETESIA machine, in exchange of rejected. money or not, on public areas to maintain companies or institutions like : hospitals, associations,….or on private fields being owned by... - Page 24 13, rue de l’Industrie, 67165 WISSEMBOURG CEDEX declare under our responsibility that the petrol brush-cutter, type AK60 - AH75 to which this declaration refers, fulfil all the relevant terms of directive 2006/42/EC applicable to them as well as to the provisions of all other applicable European directives :...
- Page 25 Stamp here please ETESIA SERVICE GARANTIE 13 rue de l'Industrie 67165 WISSEMBOURG CEDEX France...
- Page 26 * In accordance with the data protection act of 06/01/1978 amended by the law of 20/06/2018, the user has a right to have access, rectifica- tion and rejection to the personal information concerning them held by Etesia SAS, this should be made in writing to the following address: ETESIA SAS - Warranty service - 13 rue de l’Industrie - 67160 WISSEMBOURG.
Need help?
Do you have a question about the AK60 and is the answer not in the manual?
Questions and answers