Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for extronics iTAG100
Summary of Contents for extronics iTAG100
- Page 1 ATEX/IECEx Operating Manual iTAG100...
- Page 2 Operating Manual 404255(4) Document Number (See Extronics DDM for revision history) ©2020 Extronics Limited. This document is Copyright Extronics limited. Extronics reserve the right to change this manual and its contents without notice, the latest version applies.
-
Page 3: Table Of Contents
Cleaning and Maintenance Intervals ............. 9 Aggressive substances and environments ............ 9 Exposure to external stresses ............... 9 Type Codes ....................... 10 iTAG100 ...................... 10 Batteries ...................... 10 EU Declaration of Conformity ................11 Label Drawing ....................13 Warranty ......................13... -
Page 4: Introduction
Operating Manual Introduction The iTAG100 is an intrinsically safe version of the AeroScout T2 Tag and is the most advanced Wi-Fi based Active RFID tag on the market, from the company that originated the Wi-Fi tag industry. The iTAG100 is a small, long-life Wi-Fi based active RFID device that can be placed on any asset, allowing the AeroScout system to locate assets that are not Wi-Fi enabled. -
Page 5: Safety Information And Notes
3. For model variants iTAG100-1/iTAG100-1-CB (Group IIC, EPL Gb equipment with no conductive coating): • When used in a Group IIC environment, the user must take the necessary precautions to avoid the accumulation of electrostatic charge of the enclosure, to minimise static charge risk. - Page 6 For further details contact Extronics. Warning! The iTAG100 contains a source of RF power, which is software limited to <100mW, which is compliant with the requirements of EN 60079- 0:2012+A11:2013 Table 4. The user must not attempt to modify the software to exceed this power level.
-
Page 7: Installation And Setting-To-Work
3.1 Assembly and Disassembly The iTAG100 is provided ready assembled and should not be dismantled by the user. 3.2 Installation The iTAG100 should be mounted on the asset which desires tracking or worn by the person who is to be tracked. Warning! Attention should be paid to the Temperature Class (T Class) of the area which the asset or person could be entering. -
Page 8: Intended Purpose Usage
The user bears the sole risk in such cases. 4.1 Transportation and Storage All iTAG100 devices must be so transported and stored that they are not subjected to any excessive mechanical stresses. 4.2 Authorized Persons Only persons trained for the purpose are authorized to handle the iTAG100;... -
Page 9: Safety Precautions
The iTAG100 is not designed to be subjected to excessive stresses e.g. vibration, heat, impact. Additional protection is required to protect against these external stresses. The iTAG100 will require additional protection if it is installed in a location where it may be subjected to damage. -
Page 10: Type Codes
Zone 1 IIC hazardous area iTAG100-1-CB iTAG100, fitted with a call button, suitable for use in a Zone 1 IIC hazardous area iTAG100-6 iTAG100 suitable for use in a Zone 0 IIB hazardous area... -
Page 11: Eu Declaration Of Conformity
Operating Manual EU Declaration of Conformity... - Page 12 Operating Manual...
-
Page 13: Label Drawing
1 M1 Ex ia I Ma iTAG100-3-CB 1 M1 Ex ia I Ma ** PB suffix for variants to indicate push in battery. Warranty For full details of the Extronics warranty policy, please visit the Company section of www.extronics.com, and download Terms and Conditions. - Page 14 Operating Manual This page is intentionally left blank.
- Page 15 Operating Manual This page is intentionally left blank.
- Page 16 Operating Manual This page is intentionally left blank.
Need help?
Do you have a question about the iTAG100 and is the answer not in the manual?
Questions and answers