Cycle Settings And Options - LG DF20WV2 Owner's Manual

38 OPERATION

Cycle Settings and Options

Cycle Modifier Buttons
Sensor de Secado (Sensor Dry) cycles have preset
settings that are selected automatically. Secado
Manual (Manual Dry) cycles have default settings, but
you may also customize the settings using the cycle
modifier buttons. Press the button for that option to
view and select other settings.
Nivel de Secado (Dry Level)
Selects the level of dryness for the cycle. Press the
Nivel de Secado (Dry Level) button repeatedly to
scroll through available settings.
• This option is only available with Sensor de Secado
(Sensor Dry) cycles.
• The dryer will automatically adjust the cycle time.
Selecting Seco(More) or Muy Seco(Very) will
increase the cycle time, while Menos Seco(Less) or
Húmedo(Damp) will decrease the cycle time.
• Use a Menos Seco(Less) or Húmedo(Damp)
setting for items that you wish to iron.
Temp.
Adjusts the temperature setting. This allows precise
care of your fabrics and garments. Press the Temp.
button repeatedly to scroll through available settings.
Tiempo de Secado (Time Dry)
Allows you to manually select the drying time, from 20
to 60 minutes, in 10-minute increments. Use this for
small loads or to remove wrinkles.
Más Tiempo/Menos Tiempo (More Time/Less
Time)
Use the Más Tiempo/Menos Tiempo (More Time/
Less Time) buttons to add or reduce the drying time
of a Secado Manual (Manual Dry) cycle in 1-minute
increments.
Señal(Signal)
Use this button to adjust the volume of the end of
cycle signal or turn off the signal. Press the button
repeatedly until the desired volume setting is
illuminated.
Cycle Option Buttons
The dryer features several additional cycle options to
customize cycles to meet individual needs. Certain
option buttons also feature a special function that
can be activated by pressing and holding that option
button for 3 seconds. (See Special Functions on the
following page for details.)
Adding Cycle Options to a Cycle:
1
Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
2
Use the cycle modifier buttons to adjust the
settings for that cycle.
3
Press the cycle option button(s) for the option
you would like to add. A confirmation message is
shown in the display.
4
Press the Inicio/Pausa(Start/Pause) button to
start the cycle. The dryer starts automatically.
Anti Arrugas(Wrinkle Care)
Selecting this option will tumble the load periodically
for up to 3 hours after the selected cycle, or until the
door is opened. This is helpful in preventing wrinkles
when you are unable to remove items from the dryer
immediately.
Alerta Secado Húmedo(Damp Dry Signal)
With this option, the dryer will signal when the load
is approximately 80% dry. This allows you to remove
faster- drying lightweight items or items that you
would like to iron or hang while still slightly damp.
Ahorro de Energía(Energy Saver)
This option helps to reduce the energy consumption
of the Normal Cycle, depending on the load size.
When the Ahorro de Energía(Energy Saver) option
is selected, the cycle begins with an air dry section
and the drying time is increased.